Korg TRITON proX Manual page 15

JS (+X)
Specify how the pitch will change when the joystick is
moved all the way to the right. A setting of 12 produces 1
octave of change.
For example if you set this to +12 and move the joystick all
the way to the right, the pitch will rise one octave above the
original pitch.
JS (–X)
Specify how the pitch will change when the joystick is
moved all the way to the left. A setting of 12 produces 1
octave of change.
For example if you set this to –60 and move the joystick all
the way to the left, the pitch will fall five octaves below the
original pitch. This can be used to simulate the downward
swoops that a guitarist produces using the tremolo arm.
AMS (Alternate Modulation Source)
Select the source that will modulate the pitch of oscillator 1
( p.210 "AMS (Alternate Modulation Source) List").
With a setting of Off, no modulation will be applied.
Intensity
Specify the depth and direction of the effect produced by
"AMS."
With a setting of 0, no modulation will be applied. With a
setting of 12.00, the pitch will change up to one octave.
For example if you set "AMS" to After Touch and apply
pressure to the keyboard, the pitch will rise if this parameter
is set to a positive (+) value, or fall if this parameter is set to
a negative (–) value. The range is a maximum of one octave
( p.212).
2–1b: Pitch EG
Intensity ( Pitch EG )
Specify the depth and direction of the modulation that the
pitch EG specified in "Pitch EG" (2–3) will apply to the
pitch.
With a setting of 12.00, the pitch will change a maximum of
±1 octave.
AMS (Alternate Modulation Source)
Select the source that will control the pitch modulation
applied by the pitch EG ( p.210 "AMS (Alternate Modula-
tion Source) List").
With a sampling of Off, no modulation will be applied.
Intensity (AMS)
Specify the depth and direction of the effect that "AMS" will
have.
For example if you set "AMS" to Velocity and set this value
to +12.00, the velocity will control the range of pitch change
produced by the pitch EG in a range of ±1 octave ( p.212).
As you play more softly, the pitch change will draw closer to
the pitch EG levels.
Pitch change (level)
Note-on
Note-on
Note-off
Note-off
Strongly played with
Softly played
(Intensity (Pitch EG) setting) a positive (+) value
[–60...+12]
[–60...+12]
[Off, (FEG, AEG, EXT)]
[–12.00...+12.00]
[–12.00...+12.00]
[Off, (KT, EXT)]
[–12.00...+12.00]
Note-on
Note-off
Strongly played with a
negative (–) value
"Intensity" (Pitch EG) and AMS will be added to deter-
mine the depth and direction of the pitch modulation
applied by the pitch EG.
2–1c: Portamento
This turns the portamento effect (smooth change in pitch
from one note to the next) on/off, and specifies how it will be
applied. If SW 1 or 2 are set to Porta.SW:CC#65, turning SW1
or SW2 on/off will apply portamento ( p.210 "AMS (Alter-
nate Modulation Source) List" SW1:CC#80, SW2:CC#81,
Porta.SW:#65).
Portamento will also be switched when CC#65 (Porta-
mento SW) is received.
Enable
Checked: Portamento will be applied.
Unchecked: Portamento will not be applied.
Fingered
This parameter is available when "Enable" is checked.
Checked: Portamento will be applied when you continue
holding the previous note as you press the next note (legato
playing).
Unchecked: Portamento will always be applied, regardless
of how you play.
Time (Portamento Time)
This parameter is available when "Enable" is checked.
This sets the portamento time. Increasing the value will pro-
duce a slower change in pitch.
2–1d: LFO1/2
LFO1 Intensity
Specify the depth and direction of the pitch modulation
applied by the OSC 1 LFO1 settings you made in "OSC1
LFO1" (5–1).
With a setting of 12.00, a maximum of ±1 octave of pitch
modulation will be applied. Negative (–) values will invert
the LFO waveform.
JS+Y (JoyStick +Y)
Specify the depth and direction of the effect that joystick
movement in the +Y direction (away from yourself) will
have on the pitch modulation applied by the OSC1 LFO1.
As this value is increased, moving the joystick in the +Y
direction will cause the OSC1 LFO1 to produce deeper pitch
modulation. With a setting of 12.00 a maximum of ±1 octave
of pitch modulation will be applied. Negative (–) values
will invert the LFO waveform.
AMS (Alternate Modulation Source)
[Off, (PEG, FEG, AEG, KT, EXT)]
Select the source that will control the depth of pitch modula-
tion produced by the OSC1 LFO1 ( p.210 "AMS (Alternate
Modulation Source) List").
Intensity
Specify the depth and direction of the effect that "AMS" will
have.
With a setting of 0, modulation will not be applied. With a
setting of 12.00, the OSC1 LFO1 will apply a maximum of ±1
octave of pitch modulation. Negative (–) settings will invert
the LFO waveform.
For example if "AMS" is set to After Touch and you apply
[000...127]
[–12.00...+12.00]
[–12.00...+12.00]
[–12.00...+12.00]
9