0–3: Arpegg. A
(Arpeggio Play A)
0–4: Arpegg. B
(Arpeggio Play B)
Here you can make arpeggiator settings for the combina-
tion. A combination can run two arpeggiators simulta-
neously. Arpeggiator parameters can be edited in P7: Edit-
Arp., but certain major parameters can be edited in these
pages as well. You can edit these parameters in realtime, for
example by changing the arpeggio pattern while playing in
Combination P0: Play.
To save the edits you make, use "Write Combination." The
arpeggiator can also be edited in realtime by the front panel
ARPEGGIATOR [TEMPO] knob, [GATE] knob, and
0–3a: Arpeggiator Run A, B, Timbre assign
Arpeggiator Run A, B
Specify whether arpeggiator A and/or B will start up when
the ARPEGGIATOR [ON/OFF] key is pressed. Only the
arpeggiator(s) you select here will run. When the arpeggia-
tor is on, A and B can be switched on/off. This is linked with
"Arpeggiator Run A, B" (7–1b).
This indicates the arpeggiator A and B assignment status for
each timbre 1–8. These settings are made in "Arpeggiator
0–3(4)b: Arpeggiator A (B)
Pat (Pattern No.)
Key Sync. (Keyboard Synchronize)
Set the various parameters of the combination arpeggiator
( "Program P7: Edit-arpeggiator").
These parameters are linked to the parameters of the identi-
cal name (and abbreviation) in "7–2(3): Arpegg. A (B)."
[1, 2, 3, 4]
Combination P1: Edit–Program/
For each timbre 1–8, set the bank, program, pan and volume.
These parameters are linked with the identically-named
parameters in the P0: Program Select tab and Mixer tab.
1–1a: Bank No.: Prog No.: Prog Name
Bank No.: Prog No.: Prog Name
This shows the combination bank, number, and name
selected in Combination P0: Play.
1–1b: Category, Bank/Program
Link: "Category" (0–1e), Link: "Bank/Program" (0–1e)
Link: "Pan" (0–2b)
Link: "Volume" (0–2c)