Download  Print this page

Korg TRITON proX Manual Page 70

Music workstation / sampler.
Hide thumbs

Advertisement

2 Select this command to open the following dialog box.
3 In "From Measure" select the first measure that you wish
to delete, and in "To End of Measure" select the last mea-
sure that you wish to delete. (By default, "From Mea-
sure" and "To End of Measure" will be the range that you
specified in the Track Edit tab.)
4 If you wish to delete musical data from all tracks includ-
ing the master track, check "All Tracks."
If this is not checked, data will be deleted only from the
track that was selected by "Track Select."
5 To execute the Delete Measure command, press the OK
button. To cancel, press the Cancel button.
Example: When measures 3–5 are deleted, measures 6–8 are moved forward.
Before
1
2
3
Delete
After
1
2
3
Delete
If in 4 you uncheck "All Tracks" and execute this oper-
ation, the measures will not be deleted from the master
track. Time signature and tempo data will remain
unchanged, and the time signature and tempo of the
measures that were moved forward as a result of the
Delete operation will change.
Example: When measures 2 and 3 (3/4 time) of track 2 are deleted, the measures that were
at 4 and 5 are moved forward, and their time signature will change to 3/4.
1 (4/4)
Track 1
Before Delete
Track 2
1 (4/4)
1 (4/4)
Track 2
After Delete
1 (4/4)
Track 1
If in 4 you check "All Tracks" and execute this opera-
tion, the specified measures of musical data will be
deleted from all tracks including the master track, and
the time signature and tempo will also move forward
by the number of measures that were deleted.
If control data extends across a line between measures
that were deleted and measures that were not deleted,
only the data within the range being deleted will be
erased. However if note data extends across two or
more measures, deleting any of the intervening mea-
sures will delete that note data from the following mea-
sures as well.
5–1H: Insert Measure
This command inserts the specified number of measures
into the specified track. When you execute the Insert Mea-
sure command, the musical data following the insert loca-
tion will be moved backward.
If musical data is inserted into an area across which note
data has been tied, a note-off will be created immediately
before the inserted measure, and the subsequent portion of
the note will be deleted.
1 In "Track Select," specify the track into which you wish
to insert.
64
4
5
6
7
8
4
5
2 (3/4)
3 (3/4)
4 (4/4)
5 (4/4)
2 (3/4)
3 (3/4)
4 (4/4)
5 (4/4)
2 (3/4)
3 (3/4)
2 (3/4)
3 (3/4)
4 (4/4)
5 (4/4)
2 Select this command to open the following dialog box.
3 In "At Measure," specify the measure location at which
the data will be inserted. (The measure you specified in
Track Edit tab "From Measure" will be set as a default.)
4 In "Length," specify the number of measures that will be
inserted.
5 In "Meter," specify the time signature of the measures
that will be inserted.
If you want the inserted measures to match the existing
time signature, specify **/**. With any setting other than
**/**, the time signature of the inserted measures will
change, and the specified time signature will apply to all
tracks for those measures.
6 If you wish to insert measures into all tracks including
the master track, check "All Tracks." The musical data
following the inserted measures will playback in the
same way it did before the measures were inserted.
If "All Tracks" is unchecked, the measures will be
inserted into the specified track. At this time, the musical
data following the inserted location will be moved back-
ward by the number of measures that were inserted.
However, the time signature and tempo will not move.
7 To execute the Insert Measure command, press the OK
button. To cancel, press the Cancel button.
Track 1
1 (4/4)
Before Insert
1 (4/4)
Track 2
Insert two measures
1 (4/4)
Track 2
After Insert
Track 1
1 (4/4)
Measures 4 and 5 will use the previously specified
time signature.
1 (4/4)
Track 1
Before Insert
Track 2
1 (4/4)
Insert two measures
1 (4/4)
Track 2
After Insert
1 (4/4)
Track 1
Measures 2 and 3 will be 7/8, and measures 4 and 5
will be the previously specified time signature.
5–1I: Repeat Measure
This command repeatedly inserts the specified measures for
the specified number of times. When you execute the Repeat
Measure command, the measures will be inserted following
the measure specified by "To End of Measure," and musical
data following the inserted data will be moved backward. It
is convenient to use this command when you have a song
that you playback with "Track Play Loop" (0–5a, 6a) turned
on, and wish to expand it into musical data.
1 Use "Track Select" to select the track whose measures
you wish to repeat.
Time signature = **/**
2 (4/4)
3 (3/4)
4 (5/4)
5 (2/4)
2 (4/4)
3 (3/4)
4 (5/4)
5 (2/4)
2 (4/4)
3 (3/4)
4 (5/4)
5 (2/4)
2 (4/4)
3 (3/4)
4 (5/4)
5 (2/4)
Time signature = 7/8
2 (4/4)
3 (3/4)
4 (5/4)
5 (2/4)
2 (4/4)
3 (3/4)
4 (5/4)
5 (2/4)
2 (7/8)
3 (7/8)
4 (5/4)
5 (2/4)
2 (7/8)
3 (7/8)
4 (5/4)
5 (2/4)

Advertisement

   Also See for Korg TRITON proX

   Related Manuals for Korg TRITON proX

This manual also for:

Triton proTriton

Comments to this Manuals

Symbols: 0
Latest comments: