Korg TRITON proX Manual page 233

Music workstation / sampler
Hide thumbs Also See for TRITON proX:
Table of Contents

Advertisement

• Attributes
Multisample parameter attributes
MSB
LSB
G Relative parameter chunk 1
Chunk ID ('RLP1')
Chunk size (18 × number of samples in the
multisample)
Original key
MSB 1: Non Transpose 0: Transpose
bits 6–0 original key
Top key (0–127)
Tune (–99...+99 cents)
Level (–99...+99 cents)
Pan (0–127 currently unused)
Filter cutoff (–99...+99 currently unused)
KSF filename (including period and extension)
[12 bytes] × number of samples in the multisample
If the .KSF filename is "SKIPPEDSAMPL", it will be treated
as a sample skipped during loading.
If the .KSF filename is "INTERNALnnnn", internal samples
will be used.
G Relative parameter chunk 2
Chunk ID ('RLP2')
Chunk size (4)
Transposing (–64...+63)
Resonance (–99...+99)
Attack (–99...+99)
Decay (–99...+99)
G Multisample number chunk
Chunk ID('MNO1')
Chunk size (4)
Multisample number (0–)
KSF (KORG Sample File) files
There are four types of structure for these files. One consists
of a Sample Parameter chunk, Sample Data chunk, and Sam-
ple Number chunk (SMP1 + SMD1 + SNO1). Another con-
sists of a Sample Parameter chunk, Sample Data chunk,
Sample Filename chunk, and Sample Number chunk (SMP1
+ SMD1 + SMF1 + SNO1). The latter structure is in the case
where the sample data of the Sample chunk is empty, and
uses the sample data of the .KSF file specified by the Sample
Filename chunk (shared sample data).
When saving to a floppy disk and a single disk cannot
accommodate all of the data, it is possible to automatically
divide the file and continue the save operation.
When a .KSF file is created in this way, the first file will con-
sist of the Sample Parameter chunk, Sample Number chunk,
a divided Sample Parameter chunk, and a divided Sample
Data chunk (SMP1 + SNO1 + SPD1 + SDD1), and the second
and subsequent files will consist of a divided Sample Data
chunk (SDD1).
G Sample parameter chunk
Chunk ID ('SMP1')
Chunk size (32)
Sample name
Default bank (0–3)
Start address
1: Not Use 2nd Start 0: Use It
NC(0)
[4 bytes]
[4 bytes]
[1 byte]
[1 byte]
[1 byte]
[1 byte]
[1 byte]
[1 byte]
[4 bytes]
[4 bytes]
[1 byte]
[1 byte]
[1 byte]
[1 byte]
[4 bytes]
[4 bytes]
[4 bytes]
[4 bytes]
[4 bytes]
[16 bytes]
[1 bytes]
[3 bytes]
2nd start address
Loop start address
Loop end address
G Sample data chunk
Chunk ID ('SMD1')
Chunk size (12 + number of sample
databytes)
Sampling frequency
The sampling frequencies supported by the TRITON
series are 48000/47619/44100/32000/31746/31250/
29400/24000/23810/22254/22050/21333/21164/20833/
19600/16000/15873/15625/14836/14700/14222/14109/
13889/13067/12000/11905/11127/11025/10667/10582/
10417/9891/9800/9481/9406/9259/8711/8000/7937/
7813/7418/7350/7111/7055/6945/6534/6000/5953/
5564/5513/5333/5291/5208/4945/4900/4741/4703/
4630/4356/4000/3968/3906/3709/3675/3556/3527/
3472/3267/3000/2976/2782/2756/2667/2646/2604/
2473/2450/2370/2352/2315/2178/2000/1984/1855/
1838(Hz).
Attributes
Loop tune (–99...+99 cents)
Number of channels (1)
Sample size (8/16)
Number of samples
Sample data
• Attributes
Sample parameter attributes
MSB
LSB
Compression ID
1: Compressed data 0: Un-compressed data
1: Not Use 2nd Start 0: Use It
1: Reverse 0: Forward
1: Loop Off 0: Loop On
G Sample number chunk
Chunk ID ('SNO1')
Chunk size (4)
Sample number (0–)
G Sample filename chunk
Chunk ID ('SMF1')
Chunk size (12)
KSF filename
If the .KSF filename is "SKIPPEDSAMPL", it will be
treated as a sample skipped during loading.
If the .KSF filename is "INTERNALnnnn", internal sam-
ples will be used.
G Divided sample parameter chunk
Chunk ID ('SPD1')
Chunk size (12)
The following up to the sample size is the same as in the
SMD1 chunk
Sampling frequency
Attributes
Loop tune
Number of channels
Sample size
Number of samples
Total number of samples in all divided files
G Divided sample data chunk
Chunk ID ('SDD1')
[4 bytes]
[4 bytes]
[4 bytes]
[4 bytes]
[4 bytes]
[4 bytes]
[1 byte]
[1 byte]
[1 byte]
[1 byte]
[4 bytes]
variable length
[4 bytes]
[4 bytes]
[4 bytes]
[4 bytes]
[4 bytes]
[12 bytes]
[4 bytes]
[4 bytes]
[4 bytes]
[1 byte]
[1 byte]
[1 byte]
[1 byte]
[4 bytes]
[4 bytes]
227

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Triton proTriton

Table of Contents