Resampling An Arpeggiated Phrase In Program Mode - Korg TRITON Quick Start Manual

REALTIME CONTROLS
VOLUME
LPF CUTOFF RESONANCE/HPF
ASSIGNABLE 1 ASSIGNABLE 2
INPUT TRIM ULTRA BOOST
Resampling an arpeggiated phrase in Pro-
gram mode
While performing in program or combination mode, and
using the arpeggiator if desired, you can resample your
performance as audio data (sound).
As an example, this section explains how to sample an
arpeggiated phrase in Program mode. Sampling can be
performed in the same way in Combination or
Sequencer modes as well.
1 Select the program that you want to resample.
Press the [PROG] key to enter Program mode.
Select program J028: Rezbo.
2 Turn the arpeggiator on (ARPEGGIATOR [ON/
OFF] key LED is lit), and play the keyboard to ver-
ify that a phrase is produced.
Make sure that the arpeggio tempo " " is set to 120.
3 Press the Sampling tab to access the P0: Play, Sam-
pling page.
4 Press the menu button, and select "Auto Sampling
Setup."
The dialog box will appear.
22
ON/OFF
COMBI
A
EG-INTENSITY EG-RELEASE
B
SEQ
ASSIGNABLE 3 ASSIGNABLE 4
VALVE FORCE
TUBE GAIN OUTPUT LEVEL
S.PLAY
MEDIA
1 8
1 3
PROG VALUE
SAMPLING
GLOBAL
3
COMPARE
Sampling
Tab
5 Choose "Resample Program Play."
This will make the appropriate settings for resam-
pling your performance on a program.
5
6
7
Make the following settings for Resample Pro-
6
gram Play.
Set "Save to" to RAM. The resampled data will be
written to sample memory (RAM).
Check "Convert to Program." After resampling, the
data will automatically be converted a program with
the number you specify in "Program."
Use "Program" to specify the save-destination of the
4
sample created by resampling. You'll probably want
to use bank E.
7 Press the OK button to execute the command.
Settings for resampling are now completed.
Take a minute to verify that these are the settings that
have been made.
Input 1 "BUS (IFX/Indiv.) Select": Off
Input 2 "BUS (IFX/Indiv.) Select": Off
The sound from the INPUT 1, 2 jacks will not be
input.
"Source BUS": L/R
The sound sent to the L/R bus will be sampled.
1 2
2 2