Program Mode / Performance Mode; Program Mode - Korg SGPROX Owner's Manual

Program mode / Performance mode

The SGproX provides two playing modes: Program mode in which you will play
mainly the internal tone generator, and Performance mode in which you can use
the SGproX as a master keyboard.

Program mode

The SGproX contains 64 high-quality programs. With the factory settings, different banks of the same
number will select similar sounds.
Here's how to select programs.
1) Press the PROGRAM switch (The LED will light) and you will enter Program mode.
2) Use the BANK switch and the select switches to choose a program.
You can also use the +1/YES -1/NO switches to select programs.
You can use the front panel LAYER / SPLIT switch to select Single, Layer or Split. (
You can use the front panel TRANSPOSE /MASTER TUNE switch to adjust the tuning or transposition.
( p.16)
You can use the front panel Effect switch to turn the effects on/off. (
You can use the various controllers to control the internal tone generator and/or an external MIDI device.
Assignable controller settings are made in Global mode, and will be shared by all programs.
MIDI messages are transmitted/received on the Global MIDI channel (1 to 16). In Program mode, MIDI
messages are transmitted from MIDI OUT A, but nothing will be transmitted from MIDI OUT B.
In Program mode, the upper line of the LCD will indicate the program number and program name. The
lower line will indicate the function of one of the controllers (AW1/2, AL1 to 4, AP or AS).
At this time, you can use the CURSOR switches to step through the controllers to view the setting of each.
Program-related settings are made in Program Edit mode and in Global mode.
p.14)
Program number Program name
Controller
Function
Assignable Wheel 2 function
Assignable Slider 1 function
Assignable Slider 2 function
Assignable Slider 3 function
Assignable Slider 4 function
Assignable Pedal function
Assignable Switch function
p.15)
25