Page of 4

Korg TRITON RACK Installation Manual

Internal hard disk.
Hide thumbs
   
© 2002 musitronics GmbH, Version 8.4.2009
A qualified service technician should do the installation of the internal Hard Disk Drive.
We can't get responsible for damages caused by incorrect installation.
KORG TRITON RACK
Contents:
1.
General
2.
Open the KORG Triton Rack
3.
Installation of the Hard Disk - Board
4.
First Test and formatting of the Hard Drive
5.
Installation of the SCSI - Board
6.
SCSI ID Change
7.
Reassemble the KORG Triton Rack
ATTENTION:

Advertising

   Related Manuals for Korg TRITON RACK

   Summary of Contents for Korg TRITON RACK

  • Page 1: Installation Manual, Internal Hard Disk

    INSTALLATION MANUAL INTERNAL HARD DISK KORG TRITON RACK Contents: General Open the KORG Triton Rack Installation of the Hard Disk - Board First Test and formatting of the Hard Drive Installation of the SCSI - Board SCSI ID Change Reassemble the KORG Triton Rack ©...

  • Page 2

    TRITON RACK HD MANUAL Content of the Triton Rack HD Kit: • Triton Rack HD Board with SCSI to IDE converter and Hard Disk • Special 35cm internal SCSI ribbon cable • Plastic-bag 1 with parts for connecting the Triton Rack HD board •...

  • Page 3

    TRITON RACK HD MANUAL 3.2 Connection of the Power Supply It is natural that the Hard Disk needs a power supply; we use the power supply of the floppy disk that causes no problems because access to hard disk and floppy is not at the same time.

  • Page 4

    Triton Rack as shown below: 6. SCSI ID change Before you reassemble the KORG Triton you should think about the SCSI ID of your Hard Disk. We have set the SCSI ID to ID1 but with the added jumpers you can change...

Comments to this Manuals

Symbols: 0
Latest comments: