Style Tracks View Page - Korg Pa800 User Manual

88 Style Play operating mode

Style Tracks view page

Panels
The lower half of the main page contains the various panels, you
can select by touching the corresponding tabs. See more infor-
mation in the relevant sections, starting from page 89.
Volume panel
Style Tracks view page
Press the TRACK SELECT button to switch from the Normal
view to the Style Tracks view. In this view, individual Style tracks
are shown in the lower half of the display, while the upper half of
the main page changes, to show parameters for the Style tracks.
Selected track
info area
Sounds area
Press TRACK SELECT again to return to the Normal view (Key-
board tracks, grouped Style tracks, Mic/In controls).
Original Style Sounds
This parameter lets you assign different Sounds to the Style
tracks, overriding the Sounds recorded into each Style Element
pattern. These Sounds can be saved into a Performance or Style
Performance with the "Write Performance" or "Write Current
Style Performance" commands (see page 108).
Assigned Sounds, with this parameter turned on, are shown in
the Sounds area of this page.
Note: When assigning a Sound to a Style track, the "Original Style
Sounds" parameter is automatically turned off.
Note: This parameter can be saved with the Performance or Style
Performance, and is automatically set to On or Off when you select
a different Performance or Style, depending on the saved status.
On Style tracks always use the original Sounds
recorded in each Style Element. If you assign a
different Sound to a Style track, this parameter is
automatically set to Off.
Off You can assign different Sounds to each Style
track, and save them in a Performance or Style
Performance. The selected Sounds are the same
for all Style Elements (there are no different
Sounds for each Style element).
Tabs
Selected Track Info area
This line lets you see the Sound assigned to the selected track. It
appears both in the main page, and in several edit pages.
Track name
Sound name
Track name
Name of the selected track.
Sound name
Sound assigned to the selected track. Touch anywhere in this
area to open the Sound Select window, and select a different
Sound.
Sound bank
Bank of the selected Sound.
Program Change
Program Change number sequence (Bank Select MSB, Bank
Select LSB, Program Change).
Sounds area
This area lets you see Sounds and octave transposition for the
eight Style tracks.
Style track's octave transpose icon
Sound bank's icon
Sty
Style track's octave transpose icon
Non editable. Octave transpose of the corresponding track. To
change the octave transpose, use the UPPER OCTAVE buttons,
or go to the "Mixer/Tuning: Tuning" edit page (see page 96).
Sound bank's icon
This picture illustrates the bank the current Sound belongs to.
Touch an icon a first time to select the corresponding track
(detailed information are shown on the Selected Track Info area,
see above). Touch it a second time to open the Sound Select win-
dow.
Sound bank
Program Change
Sty
Sty
Sty
Sty