Korg Pa800 User Manual: Controllers: Pedal/switch; Controllers: Assignable Sliders

Professional arranger.
Hide thumbs
Also See for Pa800
Easy start - 9 pages
User manual - 310 pages
User manual - 330 pages
222
Global edit mode

Controllers: Pedal/Switch

Controllers: Pedal/Switch
This page lets you select a function to the Assignable Pedal/Foot-
switch, and calibrate the Damper and Assignable Pedal/Foot-
switch.
Pedal/Footswitch
Pedal/Footswitch
Function assigned to a continuous (i.e., volume/expression)
pedal, or to a footswitch, connected to the ASSIGNABLE PDL/
SW connector. See page 315 for a list of the assignable functions.
The first functions are switch-type functions, while the remain-
ing (starting from Master Volume) are continuous-like func-
tions.
Calibration
Use this button to calibrate and choose the polarity of the pedal/
footswitch.
1.
Connect the pedal or footswitch to the ASSIGN PEDAL/
SW connector on the back of the instrument.
2.
Go to this page, and touch the "Calibration" button in the
display. The following dialog box appears:
3.
You are asked to set the pedal to the maximum value. Press
the footswitch, or press the pedal to the maximum position
(usually front pressed).
4.
Touch the "Push" button in the display to confirm the max-
imum value. The following dialog box appears:
5.
You are now asked to set the pedal to the minimum value.
Release the footswitch, or press the pedal to the minimum
position (usually back pressed).
6.
Touch the "Push" button in the display to confirm the min-
imum value.
7.
Check if the pedal or footswitch is working properly, assign
it a function, then save by choosing the "Write Global-Glo-
bal Setup" command from the page menu.
Note: After loading a new Operating System, an older Global file, a
"SET" folder containing an older Global file, or a Backup file, you
might need to re-calibrate the pedal/footswitch.
Damper
Calibration
Use this button to calibrate the action of the Damper pedal, and
set the polarity of a Damper pedal different than the supplied
one. See above for details about the procedure.
Gbl
Controllers: Assignable Sliders
This page lets you program the two Assignable Sliders. Three sets
are available (Mic, A and B). You can assign the preferred set by
using the SLIDER MODE button on the control panel, respec-
tively selecting the MIC, A or B mode. The status of the SLIDER
MODE button can be saved with the Performance or STS.
Gbl
Assignable Slider Mic
Functions assigned to the corresponding sliders on the control
panel, when the selected mode is MIC.
See "List of Assignable Pedal and Assignable Slider (A/B) func-
tions" on page 316 for a list of the assignable functions.
Assignable Slider A, B
Functions assigned to the corresponding sliders on the control
panel, when the selected mode is A or B.
See "List of Assignable Pedal and Assignable Slider (A/B) func-
tions" on page 316 for a list of the assignable functions. The first
functions are switch-type functions, while the remaining (start-
ing from Master Volume) are continuous-like functions. Only
continuous functions can be assigned to the sliders.
Gbl
Gbl
Gbl

Advertising

   Also See for Korg Pa800

This manual also for:

Pa800

Comments to this Manuals

Symbols: 0
Latest comments:
  • AVIKESH Aug 15, 2014 08:49:
    HIDFRTYT[R​O MH=BOITYP[​OMOLRP]HO OR[PYGO[]R​TLG'RTPOY[​P465MOY P]RTOHPROG​[FPGKH0-RO​T]PRKLHP[O​TYP4LG/FLY​54