Mixer/Tuning: Fx Send - Korg Pa800 User Manual

170 Song Play operating mode

Mixer/Tuning: FX Send

Mixer/Tuning: FX Send
This page lets you set the level of the track's direct (uneffected)
signal going to the Internal FX processors.
Note: Song parameters cannot be saved when saving to a Perfor-
mance or STS.
The effect processors included in Pa800 are connected in paral-
lel, so you can decide which percentage of the direct signal can
be effected:
In case you want to send all of a track's signal to the effect (as
when using "insert" effects, like Rotary, Distortion, EQ...), just
set the Dry parameter to Off (see "Dry" above):
There are four Internal FX processors in Song Play mode. Usu-
ally, they are arranged as follows:
FX A Reverb processor for Sequencer 1 and 2.
FX B Modulating FX processor for Sequencer 1 and 2.
FX C Reverb processor for Keyboard tracks.
FX D Modulating FX processor for Keyboard tracks.
Depending on the status of the "Seq.2 FX Mode" parameter,
Sequencer 2 might use the C/D effect pair (see page 177).
Furthermore, in Sequencer mode you can create Songs using all
four effects (see "Effects: FX Select" on page 204).
Use the TRACK SELECT button to switch from Keyboard to
Song tracks, and vice-versa.
Note: When you stop, then start the Song again, or select a different
Song, the default Song track settings are selected again. You can,
however, pause the Song, change the effects, then exit from pause
and start the Song again. Edit the Song in Sequencer mode to per-
manently change the effects.
Send level (A...D)
0...127 Level of the track (direct) signal sent to the effect
processor.
Play/Mute icon
Track's play/mute status. See "Keyboard track status" on
page 161 for more information.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Sng