Audio Setup: Seq1; Audio Setup: Seq2; Audio Setup: Drums - Korg Pa800 User Manual

Audio Setup: Seq1

This page lets you connect Sequencer 1 tracks to the audio out-
puts. These setting are also applied to the Sequencer mode.
Tracks
Use these parameters to assign an audio output (OUTPUT sec-
tion, on the back of the instrument) to each track.
See "Audio Setup: Sty/Kbd" on page 226 for more information.

Audio Setup: Seq2

This page lets you connect Sequencer 2 tracks to the audio out-
puts.
Tracks
Use these parameters to assign an audio output (OUTPUT sec-
tion, on the back of the instrument) to each track.
See "Audio Setup: Sty/Kbd" on page 226 for more information.

Audio Setup: Drums

This page lets you route Drum Kit Sounds to the audio outputs.
See "Audio Setup: Sty/Kbd" on page 226 for more information
about the available audio outputs.
Gbl
Drum Output
This parameter lets you decide if Drum Kit Sounds will be sent
to the single output (or output pair) defined for the track they
are assigned to, or each drum category will be sent to a different
output.
Track When this option is selected, Drum Kits will be
sent to the output selected in one of the previous
pages for the tracks they are assigned to.
Drum Category
When this option is selected, you can select a dif-
ferent output for each category of Drum Kit
sounds. Use the "Drum Category" box below, to
select an output for each category of percussive
sounds.
Drum Category
Kick Bass Drum category.
Snare Snare Drum category.
Tom Tom category.
Hi-Hat Hi-Hat category.
Gbl
Cymbals Cymbals category.
Perc.1 Low-pitched percussion category.
Perc.2 High-pitched percussion category.
Perc. FX Sound FX category.
Global edit mode 227
Audio Setup: Seq1
Gbl
Gbl