View Menu; Devices Menu - Korg Wavestate Editor/Librarian Owner's Manual

Menus
As with Paste, if multiple Slots are selected, only the lowest-numbered selection affects the Insert Before operation;
other selections are ignored.
Duplicate
In the Main Window, this duplicates the selected item.
Select All
This selects all items shown in the front-most window, including either the main or Set List windows.
Deselect All
This clears any current selections in the front-most window.
New Set List
This creates a new Set List, with all Slots set to the Init Performance. It is available from the Main Window, when
showing either All Data or Set Lists.
Open Set List Editor
When a Set List is selected in the Main Window, this opens a Set List window for that Set List. If multiple Set Lists are
selected, it opens widows for each of them.
Select On Synth
When a Performance or Set List is selected in the Main Window, this selects the item on the wavestate. When an active
Set List window is open, this selects the current Set List Slot. When an inactive Set List window is open, this selects the
Performance assigned to the Set List Slot.
Preferences (Windows only)
This shows the Preferences dialog. For more information, see "Preferences" on page 17.

View menu

Show Librarian
This switches the main window to show the Librarian. It's the same as pressing the Librarian button in the upper right
of the window.
Show Editor
This switches the main window to show the Editor. It's the same as pressing the Editor button in the upper right of the
window.
Zoom 50%...150%
This scales the entire Editor/Librarian window to be smaller or larger.

Devices menu

This menu shows the all of the wavestates connected to the computer, and selects one of them to be used by the
Editor/Librarian. If there are multiple wavestates, you can change between them at any time. Note: when you change
devices, the undo history will be cleared, and so undo/redo will no longer be available for past actions.
Data cannot be copied directly from one wavestate to another; instead, use Export to save the data from the first
wavestate, and then Import to load the data into the second wavestate.
Important: Before connecting multiple wavestates, make sure to set each instrument's System ID to a different
number. For more information, see "Using the Editor/Librarian with two or more wavestates" on page 5.
19