Effects: Fx A; Track Controls: Mode; Track Controls: Drum Volume; Track Controls: Easy Edit - Korg Pa800 User Manual

Professional arranger
Hide thumbs Also See for Pa800:
Table of Contents

Advertisement

A Song created on the Pa800 (in Sequencer mode) can use
up to 4 effects (usually 2 reverbs + 2 modulating effects);
each track may use the A/B or C/D pair.
A Standard MIDI File or Karaoke™ file will only use 2
effects (usually 1 reverb + 1 modulating effect). This lets
you use the remaining 2 effects for the Realtime tracks.
When using both sequencers at the same time, and the
"Seq.2 FX Mode" is set to "AB" mode (see page 177), they
only use the A/B pair, while the C/D pair is reserved to the
Keyboard tracks.
When using both sequencers at the same time, and the
"Seq.2 FX Mode" is set to "CD" mode (see page 177),
Sequencer 1 uses the A/B pair, while Sequencer 2 uses the
C/D pair, sharing it with Keyboard tracks.
Effects: FX A...D
These pages contain the editing parameters for the four effect
processors. Here is an example of the FX A page, with the Reverb
Smooth Hall effect assigned.
Selected effect
Selected effect
Select one of the available effects from this pop-up menu. This is
the same as the "FX A...D" parameters found in the "Effects: FX
Select" page (see above).
FX parameters
Parameters may differ, depending on the selected effect. See the
"Advanced Edit" addendum in the Accessory CD for a list of
available parameters for each effect type.
FX Amount
Volume of the effect, that is added to the dry (uneffected) signal.
Src (Source)
Modulation source. To select the track generating this message,
see the "Mod.Track (Modulating Track)" parameters found in
the "Effects: FX Select" page (see above). For a list of modulation
sources, see the "Advanced Edit" addendum in the Accessory CD.

Track Controls: Mode

These parameters let you set the Internal/External, and the Poly/
Mono status of Song tracks. See "Track Controls: Mode" on
page 99.
Parameters
Note: These parameters can be saved to the Global-Song Play
Setup, by selecting the Write Global-Song Play Setup command
from the page menu.

Track Controls: Drum Volume

These parameters let you adjust the volume for each percussive
instrument family. See "Track Controls: Drum Volume" on
page 173.
Parameters
Note: Song track values edited in this page are not saved, and are
only intended for realtime use.

Track Controls: Easy Edit

FX param-
eters
These parameters let you "fine-tune" edit parameters for Sounds
assigned to the tracks. See "Track Controls: Easy Edit" on
page 101.
Parameters
Note: Song track values edited in this page are not saved, and are
only intended for realtime use.
Sng

Keyboard/Ensemble: Keyboard Control

These parameters let you set parameters for the Keyboard tracks.
Sng
See "Keyboard/Ensemble: Keyboard Control" on page 102.
Parameters
Sng

Keyboard/Ensemble: Key/Velocity Range

These parameters let you select a note and velocity range for the
Sng
Keyboard tracks. See "Keyboard/Ensemble: Key/Velocity Range"
on page 102.
Parameters
Song Play operating mode
Effects: FX A...D
173
Sng

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pa800

Table of Contents