Korg Pa800 User Manual: Mixer/tuning: Fx Send

Professional arranger.
Hide thumbs
Also See for Pa800
Easy start - 9 pages
User manual - 310 pages
User manual - 330 pages
94
Style Play operating mode

Mixer/Tuning: FX Send

Dry
Use this checkbox to turn the dry (direct) track signal on or off.
Note: If the track is sent to a separate output, no FX is sent to any
output. To program the output status for each track, see "Audio
Setup: Sty/Kbd" on page 227.
On
When checked, the direct, dry signal is sent to the
output, mixed with the FXs.
Track
FX Processor
Off
When unchecked, the direct, dry signal is
removed from the audio output, and only sent to
the FXs. The effected signal will still be panned
(in stereo FXs only) according to the Pan value.
Track
FX Processor
Pan
Track position in the stereo field.
L-64...L-1
Left stereo channel.
C0
Center.
R+1...R+63 Right stereo channel.
Volume of grouped Style tracks
This parameter is a general offset applied to all Styles. While the
balance between the individual Style tracks can change when
choosing a different Style, the average volume, set here, will not
change. This is useful to avoid sudden changes in volume when
choosing different Styles.
Volume of individual tracks
Track's volume. This is the relative volume of each track, as saved
in the Style, Performance or STS. It may change when choosing a
different Style, Performance or STS.
0...127
MIDI value of the track's volume.
Play/Mute icon
Track's play/mute status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Sty
Out L/R
Out L/R
Sty
Sty
Sty
Sty
Mixer/Tuning: FX Send
This page lets you set the level of the track's direct (uneffected)
signal going to the Internal FX processors. The effect processors
included in Pa800 are connected in parallel, so you can decide
which percentage of the direct signal can be effected.
In case you want to send all of a track's signal to the effect (as
when using "insert" effects, like Rotary, Distortion, EQ...), just
set the Dry parameter to Off (see "Dry" above).
There are four Internal FX processors in Style Play mode (two
for Keyboard tracks, two for Style and Pad tracks). You can
assign them any kind of available effects, but we found it conve-
nient to arrange them in the following way, for most of the
Styles, STS and Performances included with the Pa800:
FX A
Reverb processor for the Style tracks.
FX B
Modulating FX processor for the Style tracks.
FX C
Reverb processor for the Realtime (Keyboard)
tracks.
FX D
Modulating FX processor for the Realtime (Key-
board) tracks.
Use the TRACK SELECT button to switch from Keyboard to
Style tracks, and vice-versa.
Send level (A...D)
0...127
Level of the track (direct) signal sent to the effect
processor.
Play/Mute icon
Track's play/mute status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Sty
Sty

Advertising

   Also See for Korg Pa800

   Related Manuals for Korg Pa800

This manual also for:

Pa800

Comments to this Manuals

Symbols: 0
Latest comments:
  • AVIKESH Aug 15, 2014 08:49:
    HIDFRTYT[R​O MH=BOITYP[​OMOLRP]HO OR[PYGO[]R​TLG'RTPOY[​P465MOY P]RTOHPROG​[FPGKH0-RO​T]PRKLHP[O​TYP4LG/FLY​54