Sts Name Panel; Mic Panel; Sub-Scale Panel; Pad Panel - Korg Pa800 User Manual

Selected track
Touch here to open a pop-up menu where to chose the track to
be shown from.
Hint: The vocals part is often assigned to Track 4.
Options side tab
Touch this side tab to access the Options panel, and adjust the
various video settings (see details below).
Display Controls
Use these parameters to define how lyrics are shown in the dis-
play. To set the external display, see "External Display" on
page 230.
Characters
Size of fonts. You can choose between a smaller and a bigger
font.
Link int and ext video
When checked, settings for the internal display are automatically
mirrored to the external video monitor.
Show chords
If this parameter is checked, chords are shown above lyrics in the
display – provided the midifile contains them.
TXT File
Text Follow
When linking a ".TXT" file to a Song, you scroll the text by using
the Text Down and Text Up assignable commands. Unlike the
reading of Lyrics events contained in a Standard MIDI File or
MP3 file, there is no automatic scrolling, that makes the current
verse start on top of the internal and the external display at the
same time.
Therefore, text shown in the internal display and in the external
video might begin with a different verse. This parameter lets you
choose the internal or the external display as the one that must
be perfectly lined.
Song Play operating mode
Internal Video
When pressing the control corresponding to the
Text Down command, the first line of the current
page of text is shown on top of the internal video.
The external video might not be perfectly lined.
Choose this option if you are reading verses from
the internal display.
External Video
When pressing the control corresponding to the
Text Down command, the first line of the current
page of text is shown on top of the external video.
The internal video might not be perfectly lined.
Choose this option is your audience is reading
verses from an external video.
Note: When this option is selected, the text scrollbar
disappears from the internal display.
Playing the keyboard while reading chords
When playing the keyboard while a Song is running, if you want
to play the keyboard in C while seeing the original chords in the
display, set to Off the "Transpose applies to Style and Kbd
tracks..." parameter, and check the "Transpose applies to
Sequencer 1/2" parameter (see page 217).

STS Name panel

Sng
Select this panel to see the name of the four available STSs. See
"STS Name panel" on page 90 for details.
Sng

Mic panel

Select this panel to set parameters for the microphone input. See
Sng
"Mic panel" on page 91 for details.

Sub-Scale panel

Sng
Select this panel to select a secondary scale for the Keyboard
tracks. See "Mixer/Tuning: Sub Scale" on page 96 for details.

Pad panel

Select this panel to see which Hit or Sequence Pads are assigned
to the four Pads. See "Pad panel" on page 92 for details.

Split panel

Select this panel to adjust the split point for the Keyboard tracks.
See "Split panel" on page 92 for details.
167
STS Name panel