Preferences: Track Settings; Preferences: General Control - Korg Pa800 User Manual

176 Song Play operating mode

Preferences: Track Settings

Preferences: Track Settings
In this page, you can set various general parameters referred to
Song tracks.
Note: These settings are stored in the Song Play Setup area of the
Global file (together with all the other parameters marked with the
abbreviation in the manual). After changing these settings,
Sng
select the Write Global-Song Play Setup command from the page
menu to save them to the Global.
Melody
This parameter selects the Song's Melody track. This track can be
muted using the "Melody Mute" function, assignable to an
Assignable Switch, Footswitch or EC5 pedal.
Drum
This parameter selects the Song's Drum track. This track is left
set to play (together with the Bass track) when selecting the
"Drum&Bass" function, assignable to an Assignable Switch,
Footswitch or EC5 pedal.
Bass
This parameter selects the Song's Bass track. This track is left set
to play (together with the Drum track) when selecting the
"Drum&Bass" function, assignable to an Assignable Switch,
Footswitch or EC5 pedal.
Harmony Track
The Voice Processor gets the notes or chords from the track
selected with this parameter.
Note: If "Global" is selected, notes or chords sent to the Voice Pro-
cessor depend on the "Harmony Mode" and "Source" paramters of
the Global mode (see page 236 for more information).
Off No track sends notes to the Harmony module of
the Voice processor. Chords can still be received
from the MIDI IN.
Seq.1-Track 1...16
Notes are sent from one of Sequencer 1's tracks.
Seq.2-Track 1...16
Notes are sent from one of Sequencer 2's tracks.
Seq.1+2 T rack 1...16
Notes are sent by a track with the same name
from both Sequencer 1 and Sequencer 2.
Note: When both sequencers are in play, the Voice
Processor only receives notes from Sequencer 1
when the Balance slider is fully on the left, and only
from Sequencer 2 when the Balance slider is fully
on the right.
Global Notes or chords received by the Voice Processor
depend on the "Harmony Mode" parameter (see
page 236):
• if the Chords option is selected, chords are sent
from the Chord Scanning area of the keyboard.
• if the Notes option is selected, notes are sent
(instead of chords).
• if the Shift or Scalic options are selected, notes
or chords are ignored.

Preferences: General Control

Sng
In this page, you can set various general parameters.
Sng
Sng
Note: These settings are stored in the Song Play Setup area of the
Global file (together with all the other parameters marked with the
Sng abbreviation through the manual). After changing these
settings, select the Write Global-Song Play Setup command from
the page menu to save them to the Global.
Sng
Midi Setup
MIDI channels for the Song Play mode can be automatically
configured by selecting a MIDI Setup with this parameter. See
"MIDI" on page 263 for more information on using MIDI Set-
ups.
Note: To automatically select a MIDI Setup when entering the
Song Play mode, select the Write Global-Song Play Setup command
from the page menu.
For detailed information on MIDI Setup settings, see "MIDI
Setup" on page 314.
Note: After selecting a MIDI Setup, you can go to the Global mode
and apply any change to each channel setting. To store these
changes to a MIDI Setup, while still in Global mode select the Write
Global-Midi Setup command from the page menu. All MIDI Set-
ups can be freely customized and overwritten.
Hint: To restore the original MIDI Setups, load the original Fac-
tory data again (downloadable from www.korgpa.com).
Sng