Style Play operating mode
This page is where you can set the octave transpose and ﬁne tun-
ing for each track. Plus, you can program the Pitch Bend range
for each track.
Use the TRACK SELECT button to switch from the Keyboard to
the Style tracks, and vice-versa.
These parameters show the Pitch Bend range for each track, in
Maximum up/down pitch bend range (in semi-
tones). 12 = ±1 octave.
No pitch bend allowed.
This is the octave transpose value.
This is the ﬁne tuning value.
Track's play/mute status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Mixer/Tuning: Sub Scale
This page lets you program an alternative scale for the tracks
selected with the "Scale Mode" parameter (see page 106).
remaining tracks (if any) use the basic scale set in Global
mode (see "Main Scale" on page 217).
With the "Quarter Tone" box non-checked
With the "Quarter Tone" box checked
Note: A different Scale can be associated to each Performance or
Note: Quarter Tone selection can be received by MIDI (i.e., by an
external sequencer or controller). Conversely, selection of Quarter
Tone settings can be sent by the Pa800 to an external MIDI
recorder as System Exclusive data.
Selected scale. See "Scales" on page 318 for a list of the available
scales. When selecting the User scale, the keyboard diagram on
the right becomes active, letting you program a custom scale (see
"How to create a custom scale by ﬁne-tuning each note of the
User scale" below).
This parameter is needed by some scales to set the preferred
key (see "Scales" on page 318 ).
Check the Quarter Tone parameter to make the keyboard dia-
gram active, and let the SC Preset buttons appear.