Voice Processor Setup: Dynamics / Eq; Voice Processor Setup: Talk - Korg Pa800 User Manual

234 Voice Processor

Voice Processor Setup: Dynamics / EQ

Pitch Bend Range
Only available in Notes mode. Sets the range (in semitones) that
MIDI pitch bend information will alter the pitch of the harmo-
nies in Notes mode.
Pan/Volume
Pan knob
Adjusts panning for the Lead voice. L64 (panned fully left) to
R63 (panned fully right).
Level knob
This parameter sets the Lead voice level.
Off Lead voice is turned off.
-30dB ... 0dB Lead voice level.
Voice Processor Setup: Dynamics / EQ
In this page you can adjust parameters for the Compressor/Gate
and Equalizer, applied to the Lead and Harmony voices.
Assign
Dyn
Compressor/Gate assignment. The options are Off, Lead + Har-
mony, Harmony or Lead. The compressor has auto-makeup
gain, so there are no output levels problems when selecting a dif-
ferent option.
Dynamics
The Voice Processor has dynamics processing optimized for
vocals.
Thresh knob
Compressor Threshold. Range: 0 to -60 dB.
Ratio knob
Compression ratio. Range: 1.1:1 to 64:1.
Gate knob
Gate Threshold. Range: Off, -70dB to 0dB
EQ
VPs
The Voice Processor has an extremely flexible 3-band EQ with
frequency and gain-adjustable high and low shelving bands, as
well as a fully parametric band with Q control.
Low Gain knob
Low Shelving Frequency cut/boost. Range: ±12 dB.
VPs
Low Frequency knob
Low Shelving Frequency
80Hz...16kHz.
VPs
Mid Gain knob
Mid Band Frequency cut/boost. Range: ±12 dB.
Mid Frequency knob
Mid Band Frequency center frequency. Range: 80Hz...16kHz.
Mid Q knob
Resonance of the midband. Range is .1 (wide band) to 10 (very
narrow band).
High Gain knob
High Shelving Frequency cut/boost. Range: ±12 dB.
High Frequency knob
High Shelving Frequency
80Hz...16kHz.

Voice Processor Setup: Talk

This page is where you can set the Talk function, to be used to
address the audience, speaking over the background music.
Parameter contained in this page are relative to programming
VPs
parameters, and are used to attenuate the music when speaking.
VPs
After editing, you can save the Talk settings in memory, by
choosing the "Write Global - Talk Configuration dialog box"
command from the page menu (see "Write Global-Talk Config-
VPs
uration" on page 231).
Note: The "Write Global-Talk Configuration" command is only
available when the Talk is activated.
VPs
VPs
VPs
center frequency. Range:
VPs
VPs
VPs
VPs
VPs
center frequency. Range: