Advertisement
CONNECTING THE KORG PA SERIES TO AN EXTERNAL
You can program a new Song on an external sequencer, using Korg PA as a multi-timbral
expander.
Connections and settings via MIDI Interface
In order to connect the Korg PA to a computer, you need to have a computer with the MIDI
interface.
1. Connect the Pa80 and the computer as in the following diagram.
2. Go to "MIDI Setup" . Select the External Sequencer Setup.
PA3X, PA2X
PA3X musikant,
PA800, PA500
PA900, PA600
PA1X
PA80, PA50
SEQUENCER (MIDIWORKS)
Press SEQUENCER to go to the Sequencer mode. Go to the
"Preferences: Sequencer Setup" page. Select the "Extern.Seq." MIDI
Setup.
Select the "Extern.Seq." MIDI Preset. You can do this by going to the
"MIDI: General Controls" page of the Global mode.
Press SEQUENCER to go to the Sequencer mode. Go to the
"Preferences: Global Setup" page. Select the "Extern.Seq." MIDI
Setup.
Press GLOBAL, and go to "Page 5 - MIDI Setup" . Select the Ext.Seq
Setup.
Advertisement
Table of Contents
Related Manuals for Korg PA Series
Summary of Contents for Korg PA Series
- Page 1 You can program a new Song on an external sequencer, using Korg PA as a multi-timbral expander. Connections and settings via MIDI Interface In order to connect the Korg PA to a computer, you need to have a computer with the MIDI interface. 1. Connect the Pa80 and the computer as in the following diagram.
- Page 2 Connections and settings via USB to Host 1. In case you will connect the computer and the Pa800 via the USB port, install the Korg USB MIDI Driver, as explained in the User's Manual of your instrument. 2. Connect the Pa800 and the computer either via the USB Device port, or via the MIDI ports and a MIDI interface, as shown in the following diagram.
Need help?
Do you have a question about the PA Series and is the answer not in the manual?
Questions and answers