Editing Procedure Of The Cycle Data - JUKI AMB-289/IP-420 Instruction Manual

(2) Editing procedure of the cycle data

3
4
1
6
1) Display the data input screen.
Only in case of the data input screen (pink), it
is possible to input the cycle data. In case of
the sewing screen (green), press READY key
1 and display the data input screen
(pink).
2
2) Move the cursor to the position you de-
sire.
Move cursor 3 to the position you desire
with arrow mark button 2 , press pattern No.
selection button 4 , and call the pattern No.
selection screen.
3) Select the pattern No.
When UP/DOWN SCROLL button
5 is pressed, the registered pattern No. se-
lection buttons 6 are changed over in order.
Contents of the pattern data are displayed
7
in the buttons. Here, press the pattern No.
selection button you desire to select.
4) Determine the pattern No.
5
When ENTER button
pattern No. selection screen is closed and the
selection has been completed.
Ⅱ–63
7 is pressed, the