JUKI AMB-289/IP-420 Instruction Manual page 11

1
2
2) Select the pattern No. you desire to sew.
When the power is turned ON, the data input
screen is displayed. Pattern No. button
1 which is selected at present is displayed
in the upper section of the screen. Press the
button to select the pattern No. For select-
ing procedure of the pattern No., refer to
"5. PERFORMING PATTERN No. SELEC-
TION".
When you purchase the sewing machine,
Pattern Nos. 1 to 10 described in
Initial sewing data at the time of your pur-
chase have been
pattern No. you desire to sew from among
these numbers. (The No. to which the pattern
has not been registered is not displayed.)
* For the detailed explanation of this
screen, see "4. LCD DISPLAY SECTION AT
THE TIME OF INDEPENDENT
3) Set the sewing machine to sewing pos-
sible state.
Press READY key
OFF PROHIBITION screen is displayed.
Make preparations for sewing while this
screen is displayed.
When the sewing is in a possible state, the
back-light of LCD display changes to green
color.
* For the detailed explanation of the sewing
screen, refer to "4. (2) Sewing
Ⅱ–7
"21. (1)
registered". Select the
SEWING".
2 , and POWER
screen".