JUKI AMB-289/IP-420 Instruction Manual page 97

Pictograph
Error code
E022
E023
E024
E027
E028
E029
E030
E031
E042
E050
E098
Description of error
File No. error
There is no designated file in the server or
external media.
Detection of step-out of presser lifting
motor error
When step-out of motor is detected at the
time when presser lifting motor passes the
origin sensor.
Pattern data size over
When sewing cannot be performed since
the size of downloaded sewing data is too
large.
Read error
D a t a r e a d f r o m s e r v e r c a n n o t b e
performed.
Write error
D a t a w r i t e t o t h e s e r v e r c a n n o t b e
performed.
Media slot release error
Lid of media slot is open.
Needle bar upper position failure
When needle does not stop at UP position
at the time of needle UP operation.
Air pressure drop
When air pressure dropped.
Operation error
Operation of sewing data cannot be
performed.
Stop switch
When stop switch is pressed during
machine running.
Needle bar down error
When needle bar cannot be lowered.
Ⅱ–93
How to recover Place of recovery
Previous screen
Possible to
recover by
reset.
Possible to
Data input screen
recover by
reset.
Possible to
Data input screen
recover by
reset.
Previous screen
Possible to
recover by
reset.
Possible to
Previous screen
recover by
reset.
Possible to
Previous screen
recover by
reset.
Possible to
Data input screen
recover by
reset.
Possible to
Data input screen
recover by
reset.
Possible to
Data input screen
recover by
reset.
Possible to
Data input screen
recover by
reset.
Possible to
Step screen
recover by
reset.