Performing Touch Panel Compensation - JUKI AMB-289/IP-420 Instruction Manual

(4) Performing touch panel compensation

1
3
1) Display the touch panel compensation
screen.
When TOUCH PANEL COMPENSATION but-
ton
is pressed, the touch panel compensation
screen is displayed.
2) Press the lower left position.
Press red circle 3 located at the lower left
position on the screen.
When finishing the compensation, press
2
CANCEL button
3) Press the lower right position.
Press red circle 4 located at the lower
right position on the screen.
When finishing the compensation, press
2
CANCEL button
4
Ⅱ–90
1 on the check program screen
2 .
2 .