Name Of Each Section Of The Operation Panel; Body - JUKI AMB-289/IP-420 Instruction Manual

2. NAME OF EACH SECTION OF THE OPERATION PANEL

(1) Body

[ Front ]
1
2 3
Symbol
TOUCH PANEL, LCD display section
1
READY key
2
INFORMATION key
3
COMMUNICATION key
4
MODE CHANGEOVER key
5
Contrast control
6
Brightness control
7
CompactFlash (TM) eject button
8
CompactFlash (TM) slot
9
Cover detection switch
!0
Connector for external switch
!1
Connector for control-box connection
!2
1. Lightly press the target key on the touch panel with a fingertip to operate the IP-420. If
you operate with any means other than your fingertip, the IP-420 can malfunction or the
glass surface of the touch panel can be scratched or break.
2. When READY key is pressed first after turning ON the power, origin retrieval of the
clamp foot is performed. At this time, the clamp foot moves. So, be careful.
4 5
Name
[ Right side ]
6
7
8
9
!0
!1
!2
Description
Change-over of the data input screen and the sewing screen is
performed.
Change-over of the data input screen and the information screen is
performed.
Change-over of the data input screen and the communication
screen is performed.
Change-over of the data input screen and the mode change-over
screen which performs various details setting.
Ⅱ–5