JUKI AMB-289 Instruction Manual
  1. Manuals
  2. Brands
  3. JUKI Manuals
  4. Sewing Machine
  5. AMB-289
  6. Instruction manual
JUKI AMB-289 Instruction Manual

JUKI AMB-289 Instruction Manual

Operation section
Hide thumbs Also See for AMB-289:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Handbook, Engineer's Manual
CHAPTER @
Operation section

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AMB-289 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for JUKI AMB-289

Summary of Contents for JUKI AMB-289

  • Page 1 CHAPTER @ Operation section...

  • Page 2: Table Of Contents

    CONTENTS @. Operation section 1. NAME OF EACH SECTION OF THE OPERATION PANEL ......@- 1 (1) Body ..........................@- 1 (2) Buttons to be used in common ...................@- 2 2. BASIC OPERATION OF THE SEWING MACHINE ........@- 2 3. LCD DISPLAY SECTION AT THE TIME OF INDEPENDENT SEWING ..@- 8 (1) Data input screen ......................@- 8 (2) Sewing screen ......................@- 10 4.
  • Page 3 (1) Initial sewing data at the time of your purchase .............@- 36 (2) Changing procedure of sewing data ................@- 37 (3) Sewing data list ......................@- 38 21. PERFORMING NEW REGISTRATION OF THE PATTERN ......@- 42 22. COPYING SEWING PATTERN ..............@- 43 23.
  • Page 4 (2) Performing sensor check ..................@- 82 (3) Performing LCD check ....................@- 84 (4) Performing touch panel compensation ..............@- 85 40. ERROR CODE LIST ...................@- 87 41. USING COMMUNICATION FUNCTION ............@- 93 (1) Handling possible data ....................@- 93 (2) Performing communication by using the media .............@- 94 (3) Performing communication by using RS-232C ............@- 96 (4) Take-in of the data ......................@- 97 42.

  • Page 5: Operation Section

    @. Operation section 1. NAME OF EACH SECTION OF THE OPERATION PANEL (1) Body [ Front ] [ Right side ] Symbol Name Description TOUCH PANEL, LCD display section Change-over of the data input screen and the sewing screen READY key is performed.

  • Page 6: Buttons To Be Used In Common

    (2) Buttons to be used in common The buttons which perform common operations in each screen of IP-310 are as follows : CANCEL button → This button closes the pop-up screen. In case of the data change screen, the data being changed can be cancelled.
  • Page 7 3) S e t t h e s e w i n g m a c h i n e t o s e w i n g possible state. Press READY key 2 , and POWER OFF PROHIBITION screen is displayed. Make preparations for sewing while this screen is displayed.
  • Page 8 <In case of sewing flat/wrapped-around button with blindstitch or sewing flat button with blindstitch> Set button 1 to button loader 2 and depress the back part of the pedal to insert the button into button chucks 3 . (When the button loader is not used, insert the button by hand since the chuck is opened by depressing the back part of the pedal.) ↓...
  • Page 9 <In case of sewing flat button directly to cloth> Set button 1 to button loader 2 and depress the back part of the pedal to insert the button into button chucks 3 . (When the button loader is not used, insert the button by hand since the chuck is opened by depressing the back part of the pedal.) ↓...
  • Page 10 <In case of counter/stay button> Set upper button 1 to button loader 2 and depress the back part of the pedal to insert the button into button chucks 3 . (When the button loader is not used, insert the button by hand since the chuck is opened by depressing the back part of the pedal.) ↓...
  • Page 11 <In case of neck wrapping sewing> Install neck wrapping sewing unit 1 to the inserting hole of the feed plate. ↓ Set tongue 2 by hand, and make cloth presser 3 come down to fix neck wrapping sewing unit 1 . (Tongue and neck wrapping sewing unit are released by depressing the pedal reversely.) ↓...

  • Page 12: Lcd Display Section At The Time Of Independent Sewing

    3. LCD DISPLAY SECTION AT THE TIME OF INDEPENDENT SEWING (1) Data input screen Symbol Display Description Pattern No. new register screen is displayed. PATTERN NEW REGISTER → Refer to "21. PERFORMING NEW REGISTER OF SEWING button PATTERN". Sewing pattern copy screen is displayed. PATTERN COPY button "22.
  • Page 13 Symbol Display Description PATTERN SELECTION button Pattern No. being selected at present is displayed on this button and when the button is pressed, the pattern No. change screen is displayed. "4. PERFORMING PATTERN NO. SELECTION". → Refer to CONTENTS OF PATTERN Contents of the pattern which is registered to the pattern No.

  • Page 14: Sewing Screen

    (2) Sewing screen Symbol Display Description CHUCK ADJUSTMENT button Chuck adjustment screen is displayed. "23. PERFORMING CHUCK ADJUSTMENT". → Refer to BUTTON CENTERING button This is not displayed in the initial state. → Refer to "24. PERFORMING BUTTON CENTERING". PATTERN NAME display Pattern name which is set in the pattern data during sewing is displayed.
  • Page 15 Symbol Display Description CHUCK CLOSE/OPEN button This button performs close/open of the chuck. Chuck is opened as long as the button is pressed. PATTERN NO. display Pattern No. during sewing is displayed. PATTERN CONTENTS display Contents of pattern registered to pattern No. during sewing are displayed.

  • Page 16: Performing Pattern No. Selection

    4. PERFORMING PATTERN No. SELECTION 1) Display the data input screen. Only in case of the data input screen (blue), the contents of setting can be changed. In case of the sewing screen (green), press READY key 1 and display the data input screen.

  • Page 17: Naming The Pattern

    5. NAMING THE PATTERN As many as 14 characters can be inputted to the patterns respectively. 1) Display the data input screen. Only in case of the data input screen (blue), input of the pattern name can be performed. In case of the sewing screen (green), press READY key 1 and display the data input screen (blue).

  • Page 18: Sewing Method And Sewing Shape List

    6. SEWING METHOD AND SEWING SHAPE LIST Sewing method Sewing shape Sewing flat/ wrapped-around button with blindstitch Sewing flat button directly to cloth Sewing flat button with blindstitch Sewing counter/ stay button Sewing button with neck wraps – – – @– 14...

  • Page 19: Performing Data Setting Of Sewing Button With Blindstitch (Shank And Marble Buttons)

    7. PERFORMING DATA SETTING OF SEWING BUTTON WITH BLINDSTITCH (SHANK AND MARBLE BUTTONS) Items that can be set in the data input screen of sewing flat/wrapped-around button with blindstitch (shank and marble buttons) are those below. In case of performing more detailed setting, press SEWING DATA DISPLAY button H and set it from the sewing data screen.

  • Page 20: Performong Data Setting Of Sewing Button With Blindstitch (Flat Button)

    8. PERFORMONG DATA SETTING OF SEWING BUTTON WITH BLINDSTITCH (FLAT BUTTON) Items that can be set in the data input screen of sewing flat/wrapped-around button with blindstitch (flat button) are those below. In case of performing more detailed setting, press SEWING DATA DISPLAY "20.

  • Page 21: Performing Data Setting Of Sewing Button Directly To Cloth

    9. PERFORMING DATA SETTING OF SEWING BUTTON DIRECTLY TO CLOTH Items that can be set in the data input screen of sewing flat button directly to cloth are those below. In case of performing more detailed setting, press SEWING DATA DISPLAY button H and set it from the sewing data screen.

  • Page 22: Performing Data Setting Of Sewing Flat Button With Blindstitch

    10. PERFORMING DATA SETTING OF SEWING FLAT BUTTON WITH BLINDSTITCH Items that can be set in the data input screen of sewing flat button with blindstitch are those below. In case of performing more detailed setting, press SEWING DATA DISPLAY button G and set it from the sewing data screen.

  • Page 23: Performing Setting Of Counter/Stay Buttons

    11. PERFORMING SETTING OF COUNTER/STAY BUTTONS Items that can be set in the data input screen of counter and stay buttons are those below. In case of performing more detailed setting, press SEWING DATA DISPLAY button I and set it from the sewing data screen.

  • Page 24: Performing Neck Wrapping Sewing Data

    12. PERFORMING NECK WRAPPING SEWING DATA Items that can be set in the data input screen of neck wrapping sewing are those below. In case of performing more detailed setting, press SEWING DATA DISPLAY button E and set it from the sewing data screen.

  • Page 25: Performing Sewing Method Selection

    13. PERFORMING SEWING METHOD SELECTION 1) Display the data input screen. Only in case of data input screen (blue), s e l e c t i o n o f t h e s e w i n g s h a p e c a n b e performed.

  • Page 26: Performing Sewing Shape Selection

    14. PERFORMING SEWING SHAPE SELECTION 1) Display the data input screen. Only in case of the data input screen (blue), t h e s e l e c t i o n o f s e w i n g s h a p e c a n b e performed.

  • Page 27: Performing Setting Number Of Revolutions Of Sewing Machine

    15. PERFORMING SETTING NUMBER OF REVOLUTIONS OF SEWING MACHINE 1) Display the data input screen. Setting of number of revolutions of sewing machine can be performed in the data input screen and the sewing screen. 2) Display the number of revolutions setting screen. P r e s s N U M B E R O F R E V O L U T I O N S SETTING button 1 and the number of revolutions setting screen is displayed.

  • Page 28: Performing Setting Stay Thread

    16. PERFORMING SETTING STAY THREAD When sewing flat/wrapped-around button with blindstitch or sewing flat button with blindstitch is selected, STAY THREAD SETTING button is displayed in the data input screen and the sewing screen. 1) Display the stay thread setting screen. Press STAY THREAD SETTING button 1 and the stay thread setting screen is displayed.

  • Page 29: Performing Input Of Button Sewing Thread Tension

    17. PERFORMING INPUT OF BUTTON SEWING THREAD TENSION When selecting sewing flat/wrapped-around button with blindstitch, sewing flat button directly to cloth, sewing flat button with blindstitch, or sewing counter/stay button in the data input screen and the sewing screen, BUTTON SEWING THREAD TENSION SETTING button is displayed. (1) In case of simplified input 1) Display the button sewing thread tension simplified setting screen.

  • Page 30: In Case Of Detailed Input

    (2) In case of detailed input Display the data input screen and the sewing screen after the button sewing thread tension setting button has been set to the detailed input state in the customizing screen. → Refer to "35. CUSTOMIZING DTA INPUT SCREEN" "36.

  • Page 31: Sewing Data That Can Be Changed

    (3) Sewing data that can be changed 1) Normal stitches for button sewing Item Setting range Edit unit Initial value Remarks Thread tension of lower side of needle for 0 to 200 button sewing (normal stitches) Changeover angle of thread tension for button 180 to 355 1˚...
  • Page 32 3) 1st stitch for button sewing (It can be set only at the time of detailed setting.) Item Setting range Edit unit Initial value Remarks Thread tension of the start of 1st stitch for button 0 to 200 sewing Thread tension of lower side of needle for 0 to 200 button sewing (1st stitch) Changeover angle of thread tension for button...

  • Page 33: Performing Input Of Neck Wrapping Thread Tension

    18. PERFORMING INPUT OF NECK WRAPPING THREAD TENSION When sewing flat/wrapped-around button with blindstitch or neck wrapping sewing is selected in the data input screen and the sewing screen, the neck wrapping thread tension setting button is displayed. (1) In case of simplified input 1) Display the neck wrapping thread tension simplified setting screen.

  • Page 34: In Case Of Detailed Input

    (2) In case of detailed input Display the data input screen and the sewing screen after the neck wrapping thread tension setting button has been set to the detailed input state in the customizing screen. "35. CUSTOMIZING DATA INPUT SCREEN" "36.

  • Page 35: Sewing Data That Can Be Changed

    (3) Sewing data that can be changed 1) Normal stitches for neck wrapping sewing Item Setting range Edit unit Initial value Remarks Thread tension of lower side of needle for neck 0 to 200 wrapping (normal stitches) Changeover angle of thread tension for neck 180 to 355 1˚...
  • Page 36 3) 1st stitch for neck wrapping sewing (It can be set only at the time of detailed setting.) Item Setting range Edit unit Initial value Remarks Thread tension of the start of 1st stitch for neck 0 to 200 wrapping Thread tension of lower side of needle for neck 0 to 200 wrapping (1st stitch)

  • Page 37: Performing Detailed Input Of Neck Wrapping

    19. PERFORMING DETAILED INPUT OF NECK WRAPPING When the neck wrapping pitch input button is changed to the neck wrapping detailed input button in the cutomizing screen, detailed setting of the neck wrapping data can be performed. "35. CUSTOMIZING DATA INPUT SCREEN".
  • Page 38 The edit of data is performed with SELECTION button or buttons !4 . Press ENTER button !5 to determine the data. Symbol Item Input range Edit unit Initial value Number of times of neck wrapping Without : neck : 2 times wrapping : 1 time – – –...
  • Page 39 In case display of 4 is the first. Symbol Item Input range Edit unit Initial value Neck wrapping going height 0 to 2.0 0.10 (lower section of top) Neck wrapping going pitch 0.05 to 2.0 0.05 0.10 (lower section of top) 0.05 to 2.0 0.05 Neck wrapping going pitch...

  • Page 40: Changing Sewing Data

    20. CHANGING SEWING DATA (1) Initial sewing data at the time of your purchase Patterns from 1 to 8 have been already registered at the time of your purchase and the data which are different in sewing method and sewing shape are inputted in the sewing data as the initial value. Pattern Data changed from Changed...

  • Page 41: Changing Procedure Of Sewing Data

    (2) Changing procedure of sewing data 1) Display the data input screen. Only in case of the data input screen (blue), change of the sewing data can be performed. In case of the sewing screen (green), press READY key 1 and display the data input screen (blue).

  • Page 42: Sewing Data List

    No. in blue color such as is put on the data item to select the pictograph and the pictograph which is displayed in the change screen can be selected. (3) Sewing data list Sewing data are those that can be inputted to 99 patterns from pattern 1 to 99 and can be inputted to each pattern.However, the sewing data that can be inputted differ according to the selected sewing method or sewing shape.
  • Page 43 Item Setting range Edit unit Initial display Remarks Stitch shape (counter/stay button sewing) This item sets the stitch shape of counter/stay button sewing. * Selection of the shape of lower button is performed with Front : 4 - h o l e d – – –...
  • Page 44 Item Setting range Edit unit Initial display Remarks Thinning level of the stay button This item decreases the number of cross-over stitches of the lower side button at the time of stay button sewing. – – – – – – : Without thinning : Thinning level 1 Without thinning : Thinning level 2...
  • Page 45 Item Setting range Edit unit Initial display Remarks Button loader selection <In case of shank/marble button> : Loader OFF : Loader ON – – – – – – <In case of normal button> Loader used (Front side) : Loader OFF : Loader ON Number of times of wrapping 0 to 5 1 time This item sets the number of times of thread...

  • Page 46: Performing New Registration Of The Pattern

    21. PERFORMING NEW REGISTRATION OF THE PATTERN 1) Display the data input screen. Only in case of the data input screen (blue), n e w r e g i s t r a t i o n o f t h e p a t t e r n c a n b e performed.

  • Page 47: Copying Sewing Pattern

    22. COPYING SEWING PATTERN The sewing data of the pattern No. which has been already registered can be copied to the pattern No. which has not been registered. Overwriting copy of the pattern is prohibited. When you desire to overwrite, perform it after erasing the pattern once.
  • Page 48 4) Input the pattern No. of copy destination. Input the pattern No. of copy destination with ten keys 5 . It is possible to retrieve the pattern No. which is not used with –・+ buttons ( 6 ・ 7 ). 5) Start copying.

  • Page 49: Performing Chuck Adjustment

    23. PERFORMING CHUCK ADJUSTMENT 1) Display the data input screen or the sewing screen. Only in case of the data input screen A or the sewing screen B, the adjustment of chuck can be performed. 2) Display the chuck adjustment screen. Press CHUCK ADJUSTMENT button 1 and the chuck adjustment screen is displayed.

  • Page 50: Performing Button Centering

    24. PERFORMING BUTTON CENTERING Button centering button is not displayed in the initial state. Set the button centering button to the displayed state in the customizing screen of the sewing screen. 1) Display the sewing screen. Only in case of the sewing screen, centering of the button can be performed.

  • Page 51: Performing Input And Check Of Data With Step Motion

    25. PERFORMING INPUT AND CHECK OF DATA WITH STEP MOTION (1) Performing the step motion 1) Display the data input screen or the sewing screen. Only in case of the data input screen A or the sewing screen B, the step motion can be performed.
  • Page 52 3) Perform data setting. [In case of POINT SETTING MODE] Press STEP FORWARD/BACK buttons ( 5 a n d 6 ) , a n d i n p u t s t e p moves. Move to the step you desire to set and perform setting with ARROW MARK buttons 7 .
  • Page 53 [In case of SEWING MOTION STEP MODE] Press NEEDLE FORWARD/BACK buttons (!2 and !3 ) and the needle moves stitch by stitch. In addition, it is possible to move the needle stitch by stitch while actually sewing with the start switch. Move the needle to the needle entry point you desire to set and perform the adjustment with ARROW MARK buttons !4 .

  • Page 54: Data List

    (2) Data list Item Setting range Edit unit Initial display Remarks 1st stitch hole position of upper button (longitudinal) –2.00 to 0.05 1.80 4.00 1st stitch hole position of upper button (lateral) –2.00 to 0.05 1.80 4.00 1st stitch hole position of lower button (longitudinal) –13.00 to 0.05 1.60...
  • Page 55 Item Setting range Edit unit Initial display Remarks 1st stitch of first compensation of tie stitch position at –1.0 to 1.0 the end of button sewing (lateral) 2nd stitch of first compensation of tie stitch position at –1.0 to 1.0 the end of button sewing (longitudinal) 2nd stitch of first compensation of tie stitch position at –1.0 to 1.0...

  • Page 56: Performing Compensation Of Unevenness Of Button

    26. PERFORMING COMPENSATION OF UNEVENNESS OF BUTTON When Button positioning motion of the sewing data is set to "With" and the sewing preparations are in the completed state, the needle bar automatically comes down to the angle which has been set and the compensation of unevenness of button screen is displayed.

  • Page 57: Changing Sewing Mode

    27. CHANGING SEWING MODE 1) Select the sewing mode. When MODE key 1 is pressed in the state that the pattern has been registered, SEWING MODE SELECTION button 2 is displayed on the screen. When this button is pressed, the sewing mode changes alternately the individual sewing and the cycle stitching.

  • Page 58: Lcd Display Section At The Time Of Cycle Stitching

    28. LCD DISPLAY SECTION AT THE TIME OF CYCLE STITCHING This sewing machine can sew the plural sewing pattern data in order in cycle. As many as 30 patterns can be inputted. Use this function when sewing plural different button holes on the sewing product.
  • Page 59 Symbol Display Description CYCLE DATA NEW REGISTER Cycle data No. new register screen is displayed. button CYCLE DATA COPY button Cycle data No. copy screen is displayed. CYCLE DATA NAME INPUT Cycle data name input screen is displayed. "5. NAMING THE PATTERN".

  • Page 60: Sewing Screen

    (2) Sewing screen Symbol Display Description CHUCK ADJUSTMENT button Chuck adjustment screen is displayed. "23. PERFORMING CHUCK ADJUSTMENT". → Refer to BUTTON CENTERING button This is not displayed in the initial state. → Refer to "24. PERFORMING BUTTON CENTERING". CYCLE DATA NAME display Name inputted in cycle data which is being selected is desplayed.
  • Page 61 Symbol Display Description SEWING PRODUCT display Image of sewing product is displayed. SEWING ORDER display Sewing order of inputted pattern data is displayed. Pattern data during sewing is displayed in blue color. STEP SEWING button When this button is pressed, the step sewing screen which performs input and check of needle entry point is displayed.

  • Page 62: Performing Cycle Stitching

    29. PERFORMING CYCLE STITCHING First, change the sewing mode to the cycle stitching before performing setting. "27. CHANGING SEWING MODE". → Refer to (1) Selection of the cycle data 1) Display the data input screen. Only in case of the data input screen (pink), it is possible to select the cycle data No.

  • Page 63: Editing Procedure Of The Cycle Data

    (2) Editing procedure of the cycle data 1) Display the data input screen. Only in case of the data input screen (pink), it is possible to input the cycle data. In case of the sewing screen (green), press READY key 1 and display the data input screen (pink).
  • Page 64 5) Edit the sewing data of pattern inputted in cycle data. When the pattern data is inputted in the designated position, the inputted order is displayed on the screen as the sewing order. Adjust the cursor to the position where the sewing order is displayed and press sewing data button 8 .

  • Page 65: Performing Change Of Display Of Sewing Product

    30. PERFORMING CHANGE OF DISPLAY OF SEWING PRODUCT The picture displayed in the center of the screen can be changed. 1) Display the data input screen. Only in case of the data input screen (pink), it is possible to change the sewing product. In case of the sewing screen (green), press READY key 1 and display the data...

  • Page 66: Using Counter

    31. USING COUNTER (1) Setting procedure of the counter 1) Display the counter setting screen. Press Mode key 1 and the COUNTER SETTING button 2 is displayed on the screen. When this button is pressed, the counter setting screen is displayed. 2) Selection of kinds of counters This sewing machine has two kinds of counters, i.
  • Page 67 [Sewing counter] UP counter : Every time the sewing of one shape is performed, the existing value is counted up. When the existing value is equal to the set value, the count-up screen is displayed. DOWN counter : Every time the sewing of one shape is performed, the existing value is counted down.

  • Page 68: Count-Up Releasing Procedure

    4) Change of counter existing value In case of the sewing counter, press button 5 and in case of the No. of pcs. c o u n t e r, p r e s s b u t t o n 6 a n d t h e existing value input screen is displayed.
  • Page 69 2) Select the memory switch button you desire to change. Press UP/DOWN SCROOL button 3 and select the data item button 4 you desire to change. 3) Change the memory switch data. There are data items to change numerals and those to select pictographs in the memory switch data.

  • Page 70: Memory Switch Data List

    (2) Memory switch data list 1) Level 1 Memory switch data (level 1) are the motion data that the sewing machine has in common and the data that operate on all sewing patterns in common. No. Item Setting range Edit unit Initial display Remarks Pedal motion mode 1 to 3 Motion mode of the pedal is set.
  • Page 71 No. Item Setting range Edit unit Initial display Remarks Soft start 3rd stitch (button sewing) 200 to 1200 100sti/min 800sti/min Soft start 4th stitch (button sewing) 200 to 1200 100sti/min 1000sti/min Soft start 5th stitch (button sewing) 200 to 1200 100sti/min 1200sti/min Soft start mode (neck wrapping) – – – – – – Display 1st 2nd 3rd 4th stitch stitch stitch stitch stitch Rather fast 900 1200 : Slow...
  • Page 72 Item Setting range Edit unit Initial display Remarks Operation speed setting 10.0 1 to 10 Motion speed of the feed motor by means of pedal operation is set. : Slow : Fast Bottom feed move amount at the time of 10.0 0 to 25.0 0.1mm...
  • Page 73 Set this item when tongue stopper parts are changed. Tongue change display mode – – – – – – When READY key is pressed, whether AMB-189 type tongue or AMB-289 type one is judged, and displays below are shown. When * Judge value is determined with tongue change is...
  • Page 74 Item Setting range Edit unit Initial display Remarks Needle rocking motor origin compensation – 5.00 to 0.05mm 5.00 Differential motor origin compensation – 2.0 to 2.0 0.1mm Y feed upper motor origin compensation –5.00 to 5.00 0.05mm Y feed lower motor origin compensation –5.00 to 5.00 0.05mm (blindstitch origin)

  • Page 75: Performing Change Of Needle

    33. PERFORMING CHANGE OF NEEDLE 1) Display the data input screen or the sewing screen. Display the data input screen (independent sewing, cycle stitching) or the sewing screen (independent sewing, cycle stitching). 2) Call the needle change screen. When NEEDLE CHANGE button 1 is pressed, the needle comes down to the position where it can be changed and the...

  • Page 76: Performing Change Of Chuck

    3) Display the threading diagram. Press THREADING DIAGRAM DISPLAY button 2 and the threading diagram is displayed. Reference : [Mechanical section] 3. PREPARATION BEFORE OPERATION Be sure to turn OFF the power before performing the threading. 34. PERFORMING CHANGE OF CHUCK WARNING : Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the sewing machine.
  • Page 77 2) Perform installation of the chuck. Refer to the chuck installation drawing below. [Chuck installation drawing] ™ When replacing chuck 1 , loosen screws 2 and replace it. Reference : [Mechanical section] 3. PREPARATION BEFORE OPERATION (4) Replacing the button chuck 3) Perform checking of installation of the chuck.

  • Page 78: Customizing Data Input Screen

    35. CUSTOMIZING DATA INPUT SCREEN The buttons which are displayed in the data input screen can be customized to the buttons which are easy for the customers to use. (1) Registering procedure 1) Display the customize screen of the input screen.

  • Page 79: Register State At The Time Of Your Purchase

    3) Register the sewing data to the customize buttons. A s m a n y a s f o u r s e w i n g d a t a c a n b e r e g i s t e r e d t o C U S TO M I Z E b u t t o n s 8 . Register the sewing data which are frequently used for use.

  • Page 80: Customizing Sewing Screen

    36. CUSTOMIZING SEWING SCREEN The buttons which are displayed in the sewing screen can be customized to the buttons which are easy for the customers to use. (1) Registering procedure 1) Display the customize screen of the sewing screen. When MODE key 1 is held pressed for three seconds, CUSTOMIZE button 2 of the sewing screen is displayed on the...

  • Page 81: Register State At The Time Of Your Purchase

    3) Register the patterns to the direct buttons. Direct patterns can register the patterns of independent sewing and cycle stitching up to 10 patterns. 10 pieces of DIRECT PATTERN REGISTER buttons 9 are displayed on the screen, and the pattern list screen is displayed when the button of the position you desire to register is pressed.

  • Page 82: Performing Key Lock

    37. PERFORMING KEY LOCK 1) Display the key lock screen. Press MODE key 1 for three seconds, a n d t h e K E Y L O C K b u t t o n 2 i s displayed on the screen. When this button is pressed down, the key lock screen is displayed.
  • Page 83 3) Close the mode screen and display the data input screen. When the mode screen is closed and the data input screen is displayed, pictograph 5 showing the key lock state is displayed on the right-hand side of the pattern No. display. ™ Besides, only the buttons which are possible to be used even in the key lock state are displayed.(A)

  • Page 84: Displaying Version Information

    38. DISPLAYING VERSION INFORMATION 1) Display the version information screen. Press MODE key 1 for three seconds, and the VERSION INFORMATION button 2 is displayed on the screen. When this button is pressed down, the version information screen is displayed. The version information on the sewing machine you use is displayed on the version information screen, and it is...

  • Page 85: Using Check Program

    39. USING CHECK PROGRAM (1) Displaying the check program screen Press MODE key 1 for three seconds, a n d C H E C K P R O G R A M b u t t o n 2 i s displayed on the screen.

  • Page 86: Performing Sensor Check

    (2) Performing sensor check 1) Display the sensor check screen. When SENSOR CHECK button 1 on the check program screen is pressed, the sensor check screen is displayed. 2) Perform the sensor check. Input status of the various sensors can be checked on the sensor check screen.
  • Page 87 20 kinds of sensors below are displayed. Pictograph Description of sensor Pictograph Description of sensor Needle rocking motor origin Air pressure sensor Tongue open/close Differential motor origin Feed plate up (rear side) Y feed upper motor origin Feed plate down (front side) Y feed lower motor origin Chuck inversion (left side) Button loader motor origin...

  • Page 88: Performing Lcd Check

    (3) Performing LCD check 1) Display the LCD check screen. When LCD CHECK button 1 on the check program screen is pressed, the LCD check screen is displayed. 2) Check whether any dot of LCD is omitted. The screen of LCD check screen is displayed by one color only.

  • Page 89: Performing Touch Panel Compensation

    (4) Performing touch panel compensation 1) Display the touch panel compensation screen. When TOUCH PANEL COMPENSATION button 1 on the check program s c r e e n i s p r e s s e d , t h e t o u c h p a n e l compensation screen is displayed.
  • Page 90 4) Press the upper left position. Press red circle 5 located at the upper left position on the screen. When finishing the compensation, press CANCEL button 2 . 5) Press the upper right position. Press red circle 6 located at the upper right position on the screen.

  • Page 91: Error Code List

    40. ERROR CODE LIST Description of error Error code Pictograph How to recover Place of recovery E001 Contact of EEP-ROM initialization of Turn OFF the MAIN CONTROL p.c.b. power. When data is not written in EEP-ROM or data is broken, data is automatically initialized and the initialization is informed.
  • Page 92 Pictograph Description of error Error code How to recover Place of recovery E022 File No. error Previous screen Possible to There is no designated file in the server or recover by external media. reset. Possible to E023 Detection of step-out of presser lifting Data input screen recover by motor error...
  • Page 93 Pictograph Description of error Error code How to recover Place of recovery Loader motor step-out detection error Possible to Step screen E099 When step-out of motor is detected at recover by the time when loader motor passes origin reset. sensor. Confirmation of tilt of machine head Possible to Data input screen...
  • Page 94 How to recover Place of recovery Tongue type error Data input screen Possible to E497 When AMB-289 type tongue and AMB-189 recover by type one are mixedly used in the cycle reset. data. Button holding height over at the time...
  • Page 95 Pictograph Description of error Error code How to recover Place of recovery Overvoltage Tu r n O F F t h e E811 power. When input voltage is 280V or more. Tu r n O F F t h e Low voltage E813 power.
  • Page 96 Pictograph Description of error Error code How to recover Place of recovery Abnormality of communication between E916 Tu r n O F F t h e main CPU and main shaft CPU power. W h e n a b n o r m a l i t y o c c u r s i n d a t a communication.

  • Page 97: Using Communication Function

    41. USING COMMUNICATION FUNCTION Communication function can download the sewing data created with other sewing machine, creation of sewing data and sewing data created by editing device PM-1 to the sewing machine. In addition, the function can upload the aforementioned data to the media or personal computer. Smart media and RS-232C port are prepared as the vehicle to communicate.

  • Page 98: Performing Communication By Using The Media

    (2) Performing communication by using the media [ Setting procedure ] 1) Turn the label side of the compact flash to this side (place the notch of the edge to the rear.) and insert the part that has a small hole into the panel.
  • Page 99 [ Performing format ] When re-formatting the media, be sure to perform it with IP-310. The media that have been formatted with the personal computer cannot be read with IP-310. 1) Display the media format screen. When MODE key 1 is held pressed for three seconds, MEDIA FORMAT button 2 is displayed on the screen.

  • Page 100: Performing Communication By Using Rs-232C

    (3) Performing communication by using RS-232C [ Setting procedure ] It is possible to send and receive the data, by using RS-232C cable, with the personal computer or the like. For the cable to be connected, connect reverse type 9-pin (female) to the operation panel side.

  • Page 101: Take-In Of The Data

    (4) Take-in of the data 1) Display the communication screen. When communication switch of switch seat section is pressed in the data input screen, the communication screen is displayed. 2) Select the communication procedure. There are four communication procedures as described below.
  • Page 102 5) Start communication. When communication button 8 is pressed, the data communication starts.The during communication screen (A) is displayed during communication and the screen returns to the communication screen after the end of communication. Do not open the cover during reading the data.

  • Page 103: Information Function

    42. INFORMATION FUNCTION There are three functions below in the information function. 1) Oil replacement (grease-up) time, needle replacement time, cleaning time, etc. can be specified and the warning notice can be performed after the lapse of the specified time. "42.

  • Page 104: Observing The Maintenance And Inspection Information

    (1) Observing the maintenance and inspection information 1) Display the information screen. When information key 1 of the switch seat section is pressed in the data input screen, the information screen is displayed. 2) Display the maintenance and inspection information screen. P r e s s m a i n t e n a n c e a n d i n s p e c t i o n informationscreen display button 2 in...
  • Page 105 3) Perform clearing remaining time up to the replacement. When button 3 of the item you desire to clear is pressed, the time of replacement clear screen is displayed. When CLEAR button 6 is pressed, the remaining time up to the replacement is cleared.

  • Page 106: Inputting The Inspection Time

    (2) Inputting the inspection time 1) Display the information screen (maintenance personnel level). When information key 1 of the switch seat section is pressed in the data input screen for approximately three seconds, information screen (maintenance level) is displayed. In case of the maintenance personnel level, the pictograph located on the upper left side changes from blue to orange, and five buttons...

  • Page 107: Releasing Procedure Of The Warning

    3) Input the inspection time. Input the inspection time. When the inspection time is set to "0", the warning function stops. When clear button 4 is pressed, the value returns to the set value, and re-counting starts. The initial values of the inspection time of respective items are as follows.

  • Page 108: Observing The Production Control Information

    (4) Observing the production control information It is possible to designate the start, display the number of pieces of production from the start to the existing time, display the number of pieces of production target, etc. in the production control screen. There are two kinds of display ways for the production control screen.
  • Page 109 b. When displaying from the sewing screen 1) Display the sewing screen. When READY key 1 of the switch seat section is pressed in the data input screen, the sewing screen is displayed. 2) Display the production control screen. When information key 2 of the switch seat section is pressed in the sewing screen, the production control screen is displayed.

  • Page 110: Performing Setting Of The Production Control Information

    (5) Performing setting of the production control information 1) Display the production control screen. Display the production control screen referring "42.(4) Observing the production control information". 2) Input the final target value. First, input the number of pieces of the target of production in the process to which sewing is performed from now on.
  • Page 111 4) I n p u t t h e n u m b e r o f t i m e s o f t h r e a d trimming. Next, input the number of times of thread trimming per process. When number of times of thread trimming b u t t o n 5 i n t h e p r e v i o u s p a g e i s...
  • Page 112 7) Clear the counted value. When clearing the counted value, set the count to the stop state and press CLEAR button 9 . The value to be cleared is the present target value !0 and actual results value !1 only. (Note) CLEAR button is displayed only in case of stop state.

  • Page 113: Observing The Working Measurement Information

    (6) Observing the working measurement information 1) Display the information screen. When information key 1 of the switch seat section is pressed in the data input screen, the information screen is displayed. 2) Display the working measurement screen. Press working measurement screen display button 2 in the information screen.
  • Page 114 3) I n p u t t h e n u m b e r o f t i m e s o f t h r e a d trimming. Next, input the number of times of thread trimming per process. When number of times of thread trimming button E in the previous page is pressed, the number of times...
  • Page 115 6) Clear the counted value. When clearing the counted value, set the count to the stop state and press CLEAR button 7 . (Note) CLEAR button is displayed in case of the stop state only. When CLEAR button 7 is pressed, the clear confirmation screen is displayed.

  • Page 116: Communication Screen Of Maintenance Personnel Level

    43. COMMUNICATION SCREEN OF MAINTENANCE PERSONNEL LEVEL For the communication screen, the level which is normally used and the one which is used by the maintenance personnel are different in the kinds of data to be handled. (1) Data which are possible to be handledIn case of the maintenance In case of the personnel level, it is possible to use 5 different kinds of data in addition to the normal one kinds.The respective data formats are as below.

  • Page 117: Displaying Maintenance Personnel Level

    (2) Displaying maintenance personnel level 1) Display the communication screen of the maintenance personnel level. When key 1 is pressed as long as three seconds, the image located at the upper left position is changed to orange color 2 and the communication screen of the maintenance personnel level is displayed.

  • Page 118: Information Screen Of The Maintenance Personnel Level

    44. INFORMATION SCREEN OF THE MAINTENANCE PERSONNEL LEVEL (1) Display of error record 1) Display the information screen of the maintenance personnel level. When INFORMATION key 1 of switch seat section is pressed for approximately three seconds in the data input screen, the information screen of the maintenance personnel level is displayed.

  • Page 119: Display Of The Cumulative Working Information

    Pictograph 5 corresponding to the error code is displayed in the error detail screen. Refer to "40. ERROR CODE LIST". (2) Display of the cumulative working information 1) Display the information screen of the maintenance personnel level. 1 of switch When INFORMATION key seat section is pressed for approximately three seconds in the data input screen, the information...

Table of Contents