JUKI AMB-289/IP-420 Instruction Manual page 117

3) Input the number of times of thread trim-
ming.
Next, input the number of times of thread trim-
ming per process. When number of times of
thread trimming button
vious page is pressed, the number of times of
thread trimming input screen is displayed.
Input the value you desire with ten keys or
UP/DOWN buttons.
After the input, press ENTER button
3
When the input value is 0, count of
the number of times of thread trim-
ming is not performed. Use this
function by connecting the exter-
nal switch.
* For AMB, number of times of thread trim-
ming is counted up by one when one pat-
tern has been sewn.
4) Start the measurement.
6
When START button
measurement of each data is started.
4
5) Stop the count.
Display the working measurement screen re-
ferring to 1) and 2) of
working measurement information".
STOP switch
the measurement is being performed. When
STOP switch
surement is stopped.
After the stop, START button
displayed at the position of STOP button.
To continue measuring, press START but-
ton
5
not cleared until CLEAR button
pressed.
Ⅱ–113
E in the pre-
4 is pressed,
"44. (6) Observing the
5 is displayed when
5 is pressed, the mea-
4 again. The measured value is
3 .
4 is
6 is