Performing Setting Stay Thread - JUKI AMB-289/IP-420 Instruction Manual

17. PERFORMING SETTING STAY THREAD

When sewing flat/wrapped-around button with blindstitch or sewing flat button with blindstitch is select-
ed, STAY THREAD SETTING button is displayed in the data input screen and the sewing screen.
2
3
Symbol Item
Number of stitches
2
of stay thread
Amount of stay
3
thread
1) Display the stay thread setting screen.
Press STAY THREAD SETTING button
1 and the stay thread setting screen is dis-
played.
1
Setting of number of stitches 2 of the stay
thread and amount 3 of the stay thread can
be performed.
Press ENTER button
and determine the data.
4
Input range
: Without
stay thread
: 1 stitche
: 2 stitches
: 3 stitches
0 to 5.0
Ⅱ–28
4 after inputting,
Edit unit Initial value
– – –
0.1mm
: 1 stitche
1.5