Performing Chuck Adjustment - JUKI AMB-289/IP-420 Instruction Manual

24. PERFORMING CHUCK ADJUSTMENT

A
B
2
3
1
1
4
5
6
7
Ⅱ–49
1) Display the data input screen or the sew-
ing screen.
Only in case of the data input screen A or the
sewing screen B, the adjustment of chuck
can be performed.
2) Display the chuck adjustment screen.
Press CHUCK ADJUSTMENT button
1 and the chuck adjustment screen is dis-
played.
Origin retrieval is performed and the button
loader moves to the position of chuck.
Height and position can be adjusted with
CHUCK HEIGHT ADJUSTMENT button 2
and CHUCK LONGITUDINAL/LATERAL PO-
SITION ADJUSTMENT buttons 3 .
Set the chuck to the state that is easy to be
adjusted with ORIGIN RETRIEVAL READ-
JUST button 4 , CHUCK UP/DOWN
button 5 and CHUCK OPEN/CLOSE
button 6 , and confirm the adjustment.
After the adjustment, press ENTER button
7 to determine the adjustment value.