In Case Of Detailed Input - JUKI AMB-289/IP-420 Instruction Manual

(2) In case of detailed input

Display the data input screen and the sewing screen after the neck wrapping thread tension setting
button has been set to the detailed input state in the customizing screen.
"36. CUSTOMIZING DATA INPUT
→ Refer to
SCREEN".
3
4
5
1
2
6
Ⅱ–34
SCREEN" and "37. CUSTOMIZING SEWING
1) Display the neck wrapping thread tension
detailed setting screen.
Press NECK WRAPPING THREAD TEN-
SION DETAILED SETTING button
and the neck wrapping thread tension de-
tailed setting screen is displayed. Then set-
ting of thread remaining length before sewing
and the thread tension of the normal stitches
for neck wrapping can be performed.
Initial set value is the value when
polyester spun thread #50 thread is
used.
Turn the thread tension screen at each stitch
of the last stitch, 1st stitch and 2nd stitch in
order with TURN PAGE button
setting of the thread tension can be per-
formed.
The edit of data can be performed with AR-
ROW MARK (UP/DOWN)
( 3 and 5 ) and SCROLL BAR 4 respective-
ly. The data can be determined at the time of
editing.
When CANCEL button
the screen is closed and the data input
screen is displayed.
1
2 and
buttons
6 is pressed,