Information Function - JUKI AMB-289/IP-420 Instruction Manual

44. INFORMATION FUNCTION

There are three functions below in the information function.
1) Oil replacement (grease-up) time, needle replacement time, cleaning time, etc. can be specified and
the warning notice can be performed after the lapse of the specified time.
"44. (1) Observing the maintenance and inspection information"
Refer to
"44. (2) Inputting the maintenance and inspection
2) Speed can be checked at a glance and the target achieving consciousness as a line or group is in-
creased as well by the function to display the target output and the actual output.
Refer to "44. (4) Observing the production control information" and "44. (5) Performing
setting of the production control
3) Information on machine working ratio, pitch time, machine time and machine speed can be displayed
from the working state of the sewing machine.
Refer to "44. (6) Observing the working measurement
In addition, information on plural sewing machines can be controlled by the server when this function
is used by connecting SU-1 (sewing machine data server utility) with the sewing machines.
time".
information".
information".
Ⅱ–102
and