Editing Procedure Of The Lbh Continuous Stitching Data - JUKI ACF-172-1790 Instruction Manual

2-15-2. Editing procedure of the LBH continuous stitching data

① Display the LBH continuous stitching data input screen.
Only in case of the LBH continuous stitching
input screen (light blue), it is possible to change
the continuous stitching data. In case of the
sewing screen (green), press READY key
and display the LBH continuous stitching data
input screen (light blue).
After the screen is displayed, select the LBH
continuous stitching data No. you desire to edit
referring to 2-15-1. Selection of LBH
continuous stitching data,p.71.
LBH continuous stitching data No. 1 only has
been registered at the time of your purchase.
However, LBH pattern No. has not been
inputted and the screen is displayed as shown
in the figure on the right side.
② Display the feed amount input screen.
When FEED AMOUNT button
is pressed, the feed amount input screen is
displayed.
③ Input the feed amount.
Input the feed amount with plus/minus buttons
(B). Input range changes according to
the presser size which has been set.
④ Determine the feed amount.
When ENTER button
feed amount input screen is closed and input
has been completed.
(A)
(C) is pressed, the
72
A
B
C