JUKI AMB-289/IP-420 Instruction Manual page 65

Symbol Display
SEWING PRODUCT display
H
SEWING ORDER display
I
STEP SEWING button
J
COUNTER VALUE CHANGE
K
button
COUNTER CHANGE OVER
L
button
SEWING ORDER RETURN button
M
SEWING ORDER ADVANCE button
N
PATTERN NO. display
O
NUMBER OF REVOLUTIONS
P
SETTING button
STAY THREAD SETTING button
Q
BUTTON SEWING THREAD
R
TENSION SETTING button
NECK WRAPPING THREAD
S
TENSION SETTING button
PATTERN NAME display
T
LOADER MOTION
U
PATTERN CONTENTS display
V
DIRECT SELECTION button
W
Image of sewing product is displayed.
Sewing order of inputted pattern data is displayed.
Pattern data during sewing is displayed in blue color.
When this button is pressed, the step sewing screen which performs
input and check of needle entry point is displayed.
→ Refer to "26. PERFORMING INPUT AND CHECK OF DATA WITH
STEP MOTION".
Existing counter value is displayed on this button. When the button is
pressed, the counter value change screen is displayed.
→ Refer to "32. USING COUNTER".
Display of sewing counter/No. of pcs. counter can be changed over.
→ Refer to "32. USING COUNTER".
Sewing order to be sewn next is returned by one.
Sewing order to be sewn next is advanced by one.
Pattern No. during sewing is displayed.
Number of revolutions setting screen is displayed. Change of number of revolutions of
the sewing machine for button sewing and that for neck wrapping can be performed.
→ R e f e r t o " 1 6 . P E R F O R M I N G S E T T I N G N U M B E R O F
REVOLUTIONS OF SEWING
Stay thread setting screen is displayed. This screen is displayed only
in case of sewing flat/wrapped-around button with blindstitch or flat
button with blindstitch, and setting of stay thread is possible.
→ Refer to "17. PERFORMING SETTING STAY
Button sewing thread tension setting screen is displayed.
"18. PERFORMING INPUT OF BUTTON SEWING
→ Refer to
THREAD TENSION".
Neck wrap thread tension setting screen is displayed. The screen
is displayed only in case of sewing flat/wrapped-around button with
blindstitch and neck wrapping sewing.
"19. PERFORMING INPUT OF NECK WRAP THREAD
→ Refer to
TENSION".
Pattern name which is set in the pattern data during sewing is displayed.
Setting of the loader which is registered to the pattern No. during
sewing is displayed.
Contents of pattern registered to pattern No. during sewing are
displayed. Contents of display depend on the sewing method.
Blindstitch amount only can be set in the sewing screen.
When this button is pressed, the screen of the list of pattern Nos.
which have been registered to the direct selection button is displayed.
Ⅱ–61
Description
MACHINE".
THREAD".