Editing Cycle Sewing Data - JUKI LU-2828V-7 Instruction Manual

9-3-2. Editing cycle sewing data

① Displaying the sewing screen (cycle pattern) for cycle pattern
<Sewing screen (Cycle pattern)>
② Setting a cycle sewing pattern
❷
<Cycle sewing step edit screen>
❺
<Registered cycle pattern selection screen
(In numerical order)>
③ Confirming the data entered
<Cycle sewing step edit screen>
❶
❹
❸
❻
❼
Press Step key
The "cycle sewing step edit screen" is displayed.
1) Sewing pattern numbers (10 numbers at the
maximum) which have registered are dis-
played in ❷ .
Press ❷ to confirm the selection.
2) In the case a step can be additionally regis-
tered to a sewing pattern, a step which is not
yet set is displayed in the last field.
When the step which is not yet set is pressed,
the "cycle registration pattern selection screen
(in the numerical order) is displayed.
3) Select the pattern you want to register from ❺ .
Press
4) Press
the "registered cycle pattern selection screen
(In numerical order)" is displayed.
Insert a pattern ahead of the selected step.
5) The pattern is deleted by pressing
❼ to complete the operation. Then,
Press
the current screen returns to the sewing screen
for cycle sewing.
– 129 –
❶ on each sewing screen.
❻ to confirm the setting.
❸ while selecting a step. Then,
❹ .