Performing Detailed Input Of Neck Wrapping - JUKI AMB-289/IP-420 Instruction Manual

20. PERFORMING DETAILED INPUT OF NECK WRAPPING

When the neck wrapping pitch input button is changed to the neck wrapping detailed input button in the
cutomizing screen, detailed setting of the neck wrapping data can be performed.
→ Refer to "36. CUSTOMIZING DATA INPUT
2
1
4
3
5
!3
!1
!0
SCREEN".
1) Display the data input screen.
Only in case of the data input screen (blue),
detailed input of the neck wrapping data can
be performed. In case of the sewing screen
(green), press READY key
the data input screen (blue).
2) Display the neck wrapping data detailed
input screen.
Press NECK WRAPPING DETAILED INPUT
button
ping data detailed input screen.
The data that can be set at the first page is
the sewing setting data of the last cycle and
the data pages of the previous cycles can
6
be turned in order with TURN PAGE button
3 . In addition, the page being set is
8
displayed in orange at 4 .
5 is the number of stitches of neck wrapping
which is actually sewn, and the display is up-
!2
dated every time each setting is changed.
7
9
When DATA CHANGE buttons ( 6 to !3 ) are
pressed, the change pop-up is displayed.
Ⅱ–37
1 to display
2 and display the neck wrap-