JUKI AMB-289/IP-420 Instruction Manual page 95

5
4) Press the upper left position.
Press red circle 5 located at the upper left
position on the screen.
When finishing the compensation, press
2
CANCEL button
5) Press the upper right position.
6
Press red circle 6 located at the upper
right position on the screen.
When finishing the compensation, press
2
CANCEL button
6) Store the data.
When 4 points have been pressed, the screen
showing power-OFF prohibition is displayed
since the compensation data are to be stored.
Do not turn OFF the power while this
screen is being displayed.
When the power is turned OFF, the com-
pensated data are not stored.
When storing is finished, the check program
screen is automatically displayed.
Ⅱ–91
2 .
2 .