Performing Input Of Neck Wrapping Thread Tension; In Case Of Simplified Input - JUKI AMB-289/IP-420 Instruction Manual

19. PERFORMING INPUT OF NECK WRAPPING THREAD TENSION

When sewing flat/wrapped-around button with blindstitch or neck wrapping sewing is selected in the
data input screen and the sewing screen, the neck wrapping thread tension setting button is displayed.

(1) In case of simplified input

2
3
4
1) Display the neck wrapping thread tension
simplified setting screen.
Press NECK WRAPPING THREAD TEN-
SION SIMPLIFIED SETTING button
and the neck wrapping thread tension simpli-
fied setting screen is displayed. Then setting
of thread remaining length before sewing and
the thread tension of the normal stitches for
neck wrapping can be performed.
1
Initial set value is the value when
polyester spun thread #50 thread is
used.
The edit of data can be performed with AR-
5
ROW MARK (UP/DOWN)
( 2 and 4 ) and SCROLL BAR 3 respective-
ly. The data can be determined at the time of
editing.
When CANCEL button
the screen is closed and the data input
screen is displayed.
Ⅱ–33
1
buttons
5 is pressed,