Naming The Pattern - JUKI AMB-289/IP-420 Instruction Manual

6. NAMING THE PATTERN

As many as 14 characters can be inputted to the patterns respectively.
2
1
3
4
7
5 6
1) Display the data input screen.
Only in case of the data input screen (blue),
input of the pattern name can be performed.
In case of the sewing screen (green), press
READY key
put screen (blue).
2) Call the character input screen.
Press CHARACTER INPUT button
and the character input screen is displayed.
3) Input the character.
Press the character button 3 you desire to
input, and input of the character can be per-
formed. Characters (
and symbols (
be inputted. As many as 14 characters can be
inputted. The cursor can travel with CURSOR
LEFT TRAVEL button
RIGHT TRAVEL button
desire to delete the inputted character, adjust
the cursor to the position of the character you
desire to delete and press DELETE button
6 .
4) Finish inputting the character.
Press ENTER button
the character is finished. After the finish, the
inputted character is displayed in the upper
part of the data input screen (blue).
Ⅱ–17
1 and display the data in-
to and to
, , , , ,
4 and CURSOR
5 . When you
7 and inputting
2
)
) can