Releasing Procedure Of The Warning - JUKI AMB-289/IP-420 Instruction Manual

(3) Releasing procedure of the warning

3) Input the inspection time.
Input the inspection time.
When the inspection time is set to "0", the
warning function stops.
When clear button
value returns to the set value, and re-counting
4
starts.
The initial values of the inspection time of re-
spective items are as follows.
5 • Needle replacement : 0 (1,000 stitches)
• Cleaning time : 0 (hour)
• Oil replacement time : 500 (hour)
(Grease-up time)
When ENTER
the inputted value is determined.
When the designated inspection time is reached,
1
the warning screen is displayed.
In case of clearing the inspection time, press
CLEAR button
cleared and the pop-up is closed. In case of not
2
clearing the inspection time, press CANCEL but-
ton 1 and close the pop-up. Every time
one sewing is completed, the warning screen is
displayed until the inspection time is cleared.
Warning Nos. of the respective items are as
follows.
• Needle replacement : A201
• Cleaning time
• Oil replacement time : A203
(Grease-up time)
For the grease-up portion, refer to
the item of "(3) Greasing parts of 5.
MAINTENANCE of CHAPTER ! Me-
chanical section".
Ⅱ–106
4 is pressed, the
5 button is pressed,
2 . The inspection time is
: A202