Performing Formatting Of The Media - JUKI AMB-289/IP-420 Instruction Manual

43. PERFORMING FORMATTING OF THE MEDIA

To re-format a medium, the IP-420 has to be used. The IP-420 is not able to read any medium which
is formatted on a personal computer.
2
When two or more media are connected to the sewing machine, the medium to be format-
ted is determined by the predetermined priority order.
High
CF(TM) slot USB device 1
,
When a CompactFlash (TM) is inserted in the CF(TM) slot, the CompactFlash (TM) will be
formatted according to the priority order as shown above.
Refer to the USB specifications for the priority order of access.
1
3
Low
,
USB device 2
,
Ⅱ–101
1 Display the media format screen.
When 1 switch is held pressed for
three seconds, MEDIA FORMAT button
2 is displayed on the screen. When this but-
ton is pressed, the media format screen is
displayed.
2 Start formatting of the media.
Set the media you desire to format to the
media slot, close the cover, press ENTER
button 3 and formatting starts. Save
necessary data in the media to the other me-
dia before formatting. When formatting is per-
formed, the inside data are deleted.
....
,