Performing Change Of Display Of Sewing Product - JUKI AMB-289/IP-420 Instruction Manual

31. PERFORMING CHANGE OF DISPLAY OF SEWING PRODUCT

The picture displayed in the center of the screen can be changed.
2
1
3
1) Display the data input screen.
Only in case of the data input screen (pink),
it is possible to change the sewing product.
In case of the sewing screen (green), press
READY key
put screen (pink).
2) Call the sewing product selection screen.
When the sewing product selection button
2 is pressed, the sewing product se-
lection screen is displayed.
3) Select the image of sewing product to be
displayed.
Select the sewing product button 3 you de-
sire to display.
4) Determine the image of the sewing prod-
4
uct to be displayed.
When ENTER button
selection is determined and the data input
screen is displayed.
5) Image of the selected sewing product is
displayed.
The image of selected sewing product is
displayed in the data input screen. Position
and number of pieces in which pattern data
is inputted are the same as those before the
change of image of sewing product.
Ⅱ–65
1 and display the data in-
4 is pressed, the