Inputting The Inspection Time - JUKI AMB-289/IP-420 Instruction Manual

(2) Inputting the inspection time

1
2
1) Display the information screen (mainte-
nance personnel level).
When information key
seat section is pressed in the data input
screen for approximately three seconds, in-
formation screen (maintenance level) is dis-
played. In case of the maintenance personnel
level, the pictograph located on the upper left
side changes from blue to orange, and five
buttons are displayed.
2) Display the maintenance and inspection
information screen.
Press maintenance and inspection informa-
tion screen display button
information screen.
* For the two buttons displayed in the bottom
stage at the time of the maintenance person-
nel level, refer to "46. Information screen of
the maintenance personnel
The same information as that in the normal main-
tenance and inspection information screen is dis-
played in the maintenance and inspection infor-
mation screen.
When button 3 of the item you desire to change
3
the inspection time is pressed, the inspection time
input screen is displayed.
Ⅱ–105
1 of the switch
2 in the
level".