JUKI AMB-289/IP-420 Instruction Manual
Hide thumbs
Also See for AMB-289/IP-420:
- Instruction manual (122 pages) ,
- Instruction manual (33 pages)
Related Manuals for JUKI AMB-289/IP-420
Summary of Contents for JUKI AMB-289/IP-420
- Page 1 SIMPLIFIED MANUAL AMB-289/IP-420...
-
Page 2: Basic Operation Of The Sewing Machine
1. BASIC OPERATION OF THE SEWING MACHINE Power switch ON Sewing pattern selection screen Button loader adjustment screen Needle entry point input Start of sewing and check with step motion Point setting mode Sewing motion step mode Necessary needle entry points are Needle entry points are inputted set in order. - Page 3 <Explanation of the display at the time of independent sewing> 1) Data input screen A B C O E F Symbol Display Description PATTERN NEW Pattern No. new register screen is displayed. "22. PERFORMING NEW REGISTER OF SEWING PATTERN" REGISTER button →...
- Page 4 2) Sewing screen Symbol Display Description CHUCK Chuck adjustment screen is displayed. ADJUSTMENT → Refer to "24. PERFORMING CHUCK ADJUSTMENT" in Operation section of INSTRUCTION button MANUAL. BUTTON This is not displayed in the initial state. CENTERING "25. PERFORMING BUTTON CENTERING" →...
- Page 5 2. SETTING PROCEDURE OF SEWING PRODUCT <In case of sewing flat/wrapped-around button with blindstitch or sewing flat button with blindstitch> Set button 1 to button loader 2 and depress the back part of the pedal to insert the button into button chucks 3 . (When the button loader is not used, insert the button by hand since the chuck is opened by depressing the back part of the pedal.) ↓...
- Page 6 3. STITCHING DIAGRAM OF SEWING FLAT/WRAPPED-AROUND BUTTON WITH BLINDSTITCH Needle entry to cloth Needle entry to button st stitch hole position of upper button (longitudinal) Blindstitch amount st stitch hole position of upper button (lateral) Blindstitch width Upper buttonhole interval (longitudinal) Compensation of lower left position of upper button Upper buttonhole interval (lateral) Amount of stay thread...
-
Page 7: Sewing Data List
4. SEWING DATA LIST Sewing data are those that can be inputted to 99 patterns from pattern to 99 and can be inputted to each pattern. However, the sewing data that can be inputted differ according to the selected sewing method or sewing shape. Item Setting range Edit unit... - Page 8 Item Setting range Edit unit Initial display Remarks Compensation of lower left position of upper button 0.0mm –.00 to This item is set when cloth is pulled and the amount of blindstitch .00 on the left side is different from that on the right side. Compensation of 3rd stitch at the start of sewing 0.0mm 0 to 0....
- Page 9 Item Setting range Edit unit Initial display Remarks Button loader selection <In case of shank/marble button> : Loader OFF : Loader ON – – – – – – Loader used <In case of normal button> (Front side) : Loader OFF : Loader ON Number of times of wrapping This item sets the number of times of thread wrapping sewing...
- Page 10 Item Setting range Edit unit Initial display Remarks Tie stitch position of 1st stitch at the start of sewing of neck wrapping –.0 to .0 –0. (lateral) Tie stitch position of 2nd stitch at the start of sewing of neck wrapping –.0 to .0 (longitudinal) Tie stitch position of 2nd stitch at the start of sewing of neck wrapping...
-
Page 11: Error Code List
5. ERROR CODE LIST How to recover Place of recovery Pictograph Description of error Error code Detection of step-out of presser lifting motor error E0 P o s s i b l e t o D a t a i n p u t This error occurs when step-out of presser lifting motor is r e c o v e r b y screen...