Register State At The Time Of Your Purchase - JUKI AMB-289/IP-420 Instruction Manual

!0

(2) Register state at the time of your purchase

Pattern 1 has been factory-registered to the direct button at the time of purchase.
3) Register the patterns to the direct buttons.
Direct patterns can register the patterns of
independent sewing and cycle stitching up to
10 patterns.
10 pieces of DIRECT PATTERN REGISTER
buttons 9 are displayed on the screen, and
!1
the pattern list screen is displayed when the
button of the position you desire to register is
pressed.
4) Select the sewing data to be registered.
Select the pattern you desire to register with
!2
PATTERN LIST buttons !0 . Press CYCLE
PATTERN CHANGE button
the cycle pattern list screen is displayed.
Press again the selected button and the se-
lection is released.
5) Register to the customize button.
When ENTER button
register to direct button is completed and the
direct button register screen is displayed.
Pattern No. which has been registered is dis-
played on the direct button.
Ⅱ–82
!1 , and
!2 is pressed, the