JUKI AMB-289/IP-420 Instruction Manual page 82

[Chuck installation drawing]
1
2
Button
2) Perform installation of the chuck.
Refer to the chuck installation drawing below.
™ When replacing chuck 1 , loosen screws 2
and replace it.
Reference : [Mechanical section]
3. PREPARATION BEFORE OPERATION
(4) Replacing the button chuck
3) Perform checking of installation of the
chuck.
Press CHUCK MOTION button 3 and the
chuck performs open/close and inversion mo-
tions.
3
Level and perpendicular of chuck
Level
Level
Level
Perpendicular
Perpendicular
Perpendicular
Ⅱ–78
Check the level position and the
perpendicular position of the check
which has been installed after in-
stallation.
Chuck open/close
Open
Free
Close
Open
Free
Close