Table of Contents
Advertisement
2-15-2. Editing procedure of the LBH continuous stitching data
1 Display the LBH continuous stitching data
input screen.
Only in case of the LBH continuous stitching input
screen (light blue), it is possible to change the
continuous stitching data. In case of the sewing
screen (green), press READY key
display the LBH continuous stitching data input
screen (light blue).
After the screen is displayed, select the LBH
continuous stitching data No. you desire to
2-15-1. Selection of LBH
edit referring to
continuous stitching
LBH continuous stitching data No. only has
been registered at the time of your purchase.
However, LBH pattern No. has not been inputted
and the screen is displayed as shown in the
figure on the right side.
2 Display the feed amount input screen.
When FEED AMOUNT button
is pressed, the feed amount input screen is
displayed.
3 Input the feed amount.
Input the feed amount with plus/minus buttons
(B). Input range changes according to
the presser size which has been set.
4 Determine the feed amount.
When ENTER button
feed amount input screen is closed and input has
been completed.
and
data,p.71.
(A)
(C) is pressed, the
A
B
− 2 −
C
Advertisement
Table of Contents
