Take-In Of The Data - JUKI AMB-289/IP-420 Instruction Manual

(4) Take-in of the data

6
2
4
1) Display the communication screen.
When communication switch
switch seat section is pressed in the data in-
put screen, the communication screen is dis-
played.
2) Select the communication procedure.
3
There are four communication procedures as
described below.
5
2 Writing data from media to panel
3 Writing data from personal computer (server)
to panel
4 Writing data from panel to media
5 Writing data from panel to personal com-
puter (server)
1
Select the button of communication proce-
dure you desire.
3) Select the data No.
When
lection screen is displayed.
Input the file No. of the data you desire to
write. For the file No., input the numerals of
the part of AMB 00 .EPD of the
file name.
Designation of the pattern No. of writing des-
tination can be performed in the same way.
When the writing destination is the panel, pat-
tern Nos. which have not been registered are
7
displayed.
4) Determine the data No.
When ENTER button
the data No. selection screen is closed and
the selection of the data No. has been com-
pleted.
Ⅱ–99
is pressed, the writing file se-
6
7 is pressed,
1 of