Copying Sewing Pattern - JUKI AMB-289/IP-420 Instruction Manual

23. COPYING SEWING PATTERN

2
1
3
The sewing data of the pattern No. which has
been already registered can be copied to the pat-
tern No. which has not been registered.
Overwriting copy of the pattern is prohibited.
When you desire to overwrite, perform it after
erasing the pattern once.
→ Refer to "5. PERFORMING PATTERN No.
SELECTION".
1) Display the data input screen.
Only in case of the data input screen (blue),
copying is possible. In case of the sewing
screen (green), press READY key
and display the data input screen (blue).
2) Call the pattern copy screen.
When pattern copy button
pressed, the pattern copy (copy source selec-
tion) screen is displayed.
3) Select the pattern No. of copy source.
Select the pattern No. of copy source from
the list of pattern buttons 3 .
Then press copy destination input but-
4
ton 4 and the copy destination input
screen is displayed.
Ⅱ–47
1
2 is