Displaying Version Information - JUKI AMB-289/IP-420 Instruction Manual

39. DISPLAYING VERSION INFORMATION

A
B
C
D
1) Display the version information screen.
Press
the VERSION INFORMATION button
2 is displayed on the screen. When this but-
ton is pressed down, the version information
screen is displayed.
The version information on the sewing ma-
2
chine you use is displayed on the version in-
formation scren, and it is possible to check it.
A : Version information on panel program
B : Version information on main program
1 C : Version information on servo program
3
When CANCEL button
the version information screen is closed and
the mode screen is displayed.
4
2) Display the detail display screen.
When you press detail display screen but-
ton
screen appears on the display.
D : Module name
E : RVL
F : Checksum
When you press cancel button
5
detail display screen is closed to show the
version information screen.
When you press mode key
tail display screen is closed to show data en-
try screen which is being selected.
E
F
Ⅱ–85
1 key for three seconds, and
3 is pressed,
4 , and the panel-program detail
5 , the
1 , the de-