Performing Combination Sewing; How To Create Combination Data - JUKI LK-1901A Instruction Manual

22. PERFORMING COMBINATION SEWING

First, change the sewing mode to the combination sewing before performing setting.
→ Refer to
20. CHANGING SEWING MODE, p.57.

22-1 How to create combination data

① Display the data input screen.
Only in case of the data input screen (pink), it
is possible to input the combination data. In
case of the sewing screen (green), press
READY switch
screen (pink).
Pattern No. has not been registered in the
initial state, and the first pattern selection
button is displayed in the blank state.
② Display the pattern No. selection screen.
When PATTERN SELECTION button
is pressed, the pattern No. selection screen is
displayed.
③ Select the pattern No.
When UP/DOWN SCROLL button
(B) is pressed, pattern No. buttons (C) which
have been registered are changed over in order.
The contents of pattern data are displayed in
the buttons. Here, press the pattern No. buttons
you desire to select.
④ Determine the pattern No.
When ENTER button
pattern No. selection screen is closed and the
selection is finished.
to display the data input
(D) is pressed, the
A
(A)
C
63
D
B