Changing Contents Of Pattern Button - JUKI AMS-220EN / IP-420 Instruction Manual

2-18. Changing contents of pattern button

K
I
H
D
L
F
When pressing each button of B through H and J, the item data input screen is displayed. When the
buttons of I and K are pressed, Folder Nos. and With/without thread clamp are changed over.
* B Scale rate in X direction and C Scale rate in Y direction can be changed to the actual size value
input by selection of memory switch
* Max. input range and initial value of max. speed limitation D are determined with memory switch
.
* The input range of travel amount in X direction F and travel amount in Y direction G differs accord-
ing to the sewing range.
① Display the data input screen at the time of pattern button
selection.
Only in case of the data input screen (blue) at the time of pat-
tern selection, it is possible to change the contents of pattern.
In case of the sewing screen (green), press READY switch
A
to display the data input screen at the time of pattern
button selection.
② Display the pattern button data change screen.
When PATTERN BUTTON DATA CHANGE button
pressed, the pattern button data change screen is displayed.
③ Display the input screen of the item data you desire to
change.
J
Data that can be changed are 11 items below.
Item
B
B
Scale rate in X direction
C
C
Scale rate in Y direction
E
D
Thread tension
G
E
Max. speed limitation
Travel amount in X
F
direction
Travel amount in Y
G
direction
H
Sewing shape
I
Folder No.
J
Intermediate presser
K
Thread clamp
L
2-step stroke height
.
– 62 –
Input range
1.0 to 400.0(%)
1.0 to 400.0(%)
0 to 200
200 to 2800(sti/min)
1306 : –66.0 to +66.0 (mm)
1510 : –76.0 to +76.0(mm)
2210 : –111.0 to +111.0(mm)
1306 : –31.0 to +31.0(mm)
1510 : –51.0 to +51.0(mm)
2210 : –51.0 to +51.0(mm)
-
1 to 5
0.0 to 3.5 (mm)
(Max. 0.0 to 7.0 (mm))
With/without
Motor-driven type : 50 to 90
Air-driven type : 10 to 300
A is
Initial value
100.0
100.0
Pattern set value
2800
0.0
0.0
-
-
Pattern set value
With
70
35